HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement

Jacob Richardson Earl y 2 otros contribuidores

Última actualización: May 7, 2024

10 - 15 minutos

Fácil

Introducción

Use this guide to aid in the removal and replacement of the fan and heat sink to any HP Pavilion x360 14m-cd0005dx laptop. Replace the fan if the computer cannot stay cool during use. For further information as to whether the fan and heat sink should be replaced, look at this troubleshooting guide.

The fan and heat sink are essential parts of any laptop. After replacing the fan, an increase in computer performance can occur as components that were formerly overheating are now able to run at full capacity. If the fan and heat sink needs to be replaced but are not, further damage to the system can quickly happen. Device components may break down and melt if they are not cooled properly. It is far easier for a laptop to overheat when the fan and heat sink aren't functioning correctly.

Qué necesitas

Herramientas

Paso 1 Back Cover

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement, Back Cover: paso 1, imagen 1 de 1

Turn off and shut down the computer.
Disconnect the power adapter and all external devices connected to the computer.
Do not work with the device powered on. It may result in bodily harm through electric shock.

Editar

Paso 2

Flip the device with the backplate up and with the hinge on the far side.

Editar

Paso 3

Use the opening tool to remove the rubber feet attached to the bottom of the device.

Editar

Paso 4

Remove all screws located on the bottom of the device:
Two Phillips #0 7.0mm screws
Three Phillips #00 4.5mm screws
Make sure to keep track of all screws removed from the device.

Editar

Paso 5

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement: paso 5, imagen 3 de 3

Using the opening tool, carefully remove the bottom cover from the device.

Editar

Paso 6 Battery

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement, Battery: paso 6, imagen 1 de 3

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement, Battery: paso 6, imagen 2 de 3

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement, Battery: paso 6, imagen 3 de 3

Use a #00 Phillips screwdriver to remove:
Six 2.5 mm screws

Editar

Paso 7

Carefully lift from the base and remove the battery.

Editar

Paso 8 Heat Sink and Fan

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement, Heat Sink and Fan: paso 8, imagen 1 de 1

Remove the tape that secures the fan to the computer.

Editar

Paso 9

Herramienta utilizada en este paso:

Tweezers

$4.99

Añadir a la cesta

Find the fan cable
Use the Reverse Tweezers to unplug the fan cable

Editar

Paso 10

HP Pavilion x360 14m-cd0005dx Heat Sink and Fan Replacement: paso 10, imagen 3 de 3

Remove all screws securing the fan to the device:
Two Phillips #00 4.5mm screws
Four Phillips #00 4.5mm screws

Editar

Paso 11

Lift and remove the fan and heat sink from the device.
When removing the fan, there will be an adhesive strip attached to the bottom. There may be some resistance as the device is being removed. Use a spudger to hold the adhesive down during removal.

Editar