Saltar al contenido principal

HP Pavilion x360 14m-cd0003dx Touchpad Replacement

Qué necesitas

  1. HP Pavilion x360 14m-cd0003dx Touchpad Replacement, Battery: paso 1, imagen 1 de 1
    • Turn off the computer.

    • Disconnect the power cord and any external devices connected to the computer.

    • Make sure the device is completely turned off or else you may risk injury through electric shock.

  2. HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 2, imagen 1 de 2 HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 2, imagen 2 de 2
    • Flip the device so that the back plate of the laptop is up.

    • Use a Phillips #0 screwdriver to remove the four 6 mm Phillips screws from the bottom cover.

    • You might have to use a spudger to remove any rubber bezels that cover the screws.

    • Pry off the back cover with the spudger tool.

  3. HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 3, imagen 1 de 3 HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 3, imagen 2 de 3 HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 3, imagen 3 de 3
    • Remove the six 5 mm battery screws, and the battery can then be taken out.

  4. HP Pavilion x360 14m-cd0003dx Touchpad Replacement, Touchpad: paso 4, imagen 1 de 3 HP Pavilion x360 14m-cd0003dx Touchpad Replacement, Touchpad: paso 4, imagen 2 de 3 HP Pavilion x360 14m-cd0003dx Touchpad Replacement, Touchpad: paso 4, imagen 3 de 3
    • Lift the black tab on the ZIF connector, and gently pull the track pad ribbon cable free.

  5. HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 5, imagen 1 de 3 HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 5, imagen 2 de 3 HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 5, imagen 3 de 3
    • Use a Phillips Head Screwdriver to remove the bottom 3 screws (5 mm).

    • Remove the metal plate that secures the touch pad.

  6. HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 6, imagen 1 de 2 HP Pavilion x360 14m-cd0003dx Touchpad Replacement: paso 6, imagen 2 de 2
    • Use a Phillips Head Screwdriver to unscrew top 3 screws (5 mm).

    • Remove touch pad.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Elijah Jope

Miembro Desde 03/22/22

379 Reputación

3 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 10

Todo El Tiempo: 380