HP Pavilion x360 14m-cd0003dx Hinges Replacement

Última actualización: May 25, 2022

30 minuto

Difícil

Introducción

This guide helps you with removal and replacing the Hinges for HP Pavilion x360 14m-cd0003dx laptop. If your laptop's hinges have trouble closing or make cracking noises they may need to be replaced.

For further information to determine if the Hinges needs to be replaced, please refer to this troubleshooting guide.

Qué necesitas

Herramientas

Paso 1 Screen

HP Pavilion x360 14m-cd0003dx Hinges Replacement, Screen: paso 1, imagen 1 de 1

Turn off the computer.
Disconnect the power cord and any external devices connected to the computer.
Make sure the device is completely turned off or else you may risk injury through electric shock.

Traducir

Paso 2

Use a plastic opening tool to carefully separate the screen from the plastic frame.
Work along the top first, and then down the left and right sides.

Traducir

Paso 3

The screen can then be separated from the frame and laid flat on top of the keyboard.
Do not pull and try to remove yet, as the screen is still connected by several cables.

Traducir

Paso 4

The next few steps involve disconnecting the screen from the laptop in several places.
The first place is connected to the left side of the thin blue board at the top.
Peel back the clear adhesive and remove the pin header from the port on the blue board.

Traducir

Paso 5

The next place is underneath the gray adhesive. Peel back this adhesive to expose the connection underneath.
Disconnect the gold pin header from its port.

Traducir

Paso 6

Repeat Step 4 for the connection on the right side.
Peel the clear adhesive and remove connection.

Traducir

Paso 7

HP Pavilion x360 14m-cd0003dx Hinges Replacement: paso 7, imagen 3 de 3

Peel the thin gray adhesive strips.
Pull out the thin black cable underneath these strips. It is the same black cable that was disconnected in the previous steps.

Traducir