HP Pavilion 15-au123cl RAM Replacement

Última actualización: December 28, 2017

15 - 20 minutos

Moderado

Introducción

By following this guide, you will be able to change the RAM sticks on your laptop. You may wish to do this if you want to upgrade the maximum RAM available or if you are noticing slowdown on your computer. You will first remove the battery before you remove the RAM.

Qué necesitas

Herramientas

Paso 1 Battery

HP Pavilion 15-au123cl RAM Replacement, Battery: paso 1, imagen 1 de 1

Make sure the laptop is off and unplugged before starting.
Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.

Editar

Paso 2

Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.

Editar

Correction. Top two screen pivot screws are bigger than the 8, 4mm.

Mitchell Culp II - 8 de ago. de 2021 Contestar

Paso 3

Using the plastic opening tool, remove the back cover of the laptop.
It is recommended that you start with a corner and run the tool throughout the edges of the cover.
Be sure not to bend the cover by applying too much force.

Editar

What? I think you have have neglected to mention the DVD drawer. I believe it needs to be pulled out after removing the center screw and before removing the cover.

Dan Enslow - 24 de ene. de 2019 Contestar

Yes, best to remove the drawer as recommended. Also there are 3 screws holding the battery, not 2.

Lastly, pay careful attention to the orientation photo when removing the back.

I did not have the plastic tool but used a small Teflon type kitchen spatula and it did the trick. Do not use a metal screw driver or other such tool.

Edward Yandek - 1 de sep. de 2019 Contestar