GATEWAY ML6720 Keyboard Replacement

Nathan Da Silva y 6 otros contribuidores

Última actualización: August 8, 2024

Sin estimación

Moderado

Error de marcado

¡Viñetas!

Faltan Detalles

Introducción

Ir al paso 1

This repair could help you save hundreds of dollars on key installments. The GATEWAY ML6720 Keyboard replacement can resolve unresponsive keys or prevent keys from sticking down.

Qué necesitas

Herramientas

Phillips #00 Screwdriver

Paso 1 Battery

Flip the laptop on to the backside.

Editar

Paso 2

Locate the battery at the very top on the backside of the laptop.

Editar

Paso 3

Slide the latch in the top right corner to the right, to set it to unlocked.

Editar

Paso 4

Hold the other latch in the top left corner to the left.
Hold it in that place with your thumb until the completion of the next step. (This step unlocks the second latch.)

Editar

Paso 5

With both latches unlocked you can now slide out the battery, by pushing it off the top.

Editar

Paso 6 Keyboard

GATEWAY ML6720 Keyboard Replacement, Keyboard: paso 6, imagen 1 de 1

Turn the laptop on its backside with the stickers and barcode facing you.

Editar

Paso 7

GATEWAY ML6720 Keyboard Replacement: paso 7, imagen 3 de 3

Be careful of losing the screws because of how small they are
Remove the six 2.0mm Phillips screws and panels from the back of the RAM, motherboard, and laptop fan.

Editar

Paso 8

Have your laptop remained on the backside
Remove the twelve identical 2.0mm Phillips Screws located around the back of the laptop using the Phillips #0 Screwdriver.
Remove the entire back panel of the laptop

Editar

Paso 9

Herramienta utilizada en este paso:

Tweezers

$4.99

Añadir a la cesta

Using a pair of tweezers or the tip of your screw driver, dig into the laptop cover and apply force to pop it out.
Do this on the left and right side of the cover.