Saltar al contenido principal
Disassembling Nokia 3560 Microphone

Disassembling Nokia 3560 Microphone

Sam Ryan

Sam Ryan y 5 otros contribuidores

Última actualización: May 7, 2024

10 - 15 minutos
Moderado
Herramientas Incorrectas
Faltan requisitos previos

Introducción

Ir al paso 1

This guide will show you how to remove the microphone from the Nokia 3560.

Qué necesitas

Herramientas

  1. Disassembling Nokia 3560 Microphone, Back Cover: paso 1, imagen 1 de 2 Disassembling Nokia 3560 Microphone, Back Cover: paso 1, imagen 2 de 2
    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. Disassembling Nokia 3560 Microphone, Disassembling Nokia 3560 Keypad: paso 2, imagen 1 de 1
    • Lift the front case off of the phone body.

  3. Disassembling Nokia 3560 Microphone: paso 3, imagen 1 de 2 Disassembling Nokia 3560 Microphone: paso 3, imagen 2 de 2
    • Lift the keypad off of the phone.

  4. Disassembling Nokia 3560 Microphone, Disassembling Nokia 3560 LCD Display: paso 4, imagen 1 de 1
    • The screen is held to the body by six screws.

  5. Disassembling Nokia 3560 Microphone: paso 5, imagen 1 de 1
    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  6. Disassembling Nokia 3560 Microphone: paso 6, imagen 1 de 2 Disassembling Nokia 3560 Microphone: paso 6, imagen 2 de 2
    • Insert a flat screwdriver between the black body and plastic layer.

  7. Disassembling Nokia 3560 Microphone: paso 7, imagen 1 de 1
    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

  8. Disassembling Nokia 3560 Microphone, Disassembling Nokia 3560 Logic Board: paso 8, imagen 1 de 1
    • With the screws removed, the logic board can then be lifted out of the body by hand.

  9. Disassembling Nokia 3560 Microphone, Microphone: paso 9, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    • Use tweezers to securely grip the microphone, then pull.

    • Be careful not to remove the metal prongs.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

Miembro Desde 04/18/10

1 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 30-39, Garner Spring 2010 Miembro de Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

Miembros de 5

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 22

Todo El Tiempo: 1,923