Saltar al contenido principal
Coolpix S01 USB Cover Replacement

Coolpix S01 USB Cover Replacement

Fernando Ochoa

Fernando Ochoa y 3 otros contribuidores

Última actualización: May 7, 2024

8 minuto
Fácil
Mejor introducción

Qué necesitas

Herramientas

Ver más…

  1. Coolpix S01 USB Cover Replacement, USB Cover: paso 1, imagen 1 de 3 Coolpix S01 USB Cover Replacement, USB Cover: paso 1, imagen 2 de 3 Coolpix S01 USB Cover Replacement, USB Cover: paso 1, imagen 3 de 3
    • First make sure the camera is powered off.

    • Use the Hex and PH000 tool to remove the 2 mm screw from the left side of the camera.

    • Next remove the 2 mm screw from the right side of the camera.

  2. Coolpix S01 USB Cover Replacement: paso 2, imagen 1 de 3 Coolpix S01 USB Cover Replacement: paso 2, imagen 2 de 3 Coolpix S01 USB Cover Replacement: paso 2, imagen 3 de 3
    • Remove the 3mm screw from the bottom of the camera.

    • Once you have the 2mm and 3mm screws out, gently pull the sides up with the smallest plastic opening tool. This will reveal the inside of the camera.

    • Be sure to remove the battery before continuing your repair.

  3. Coolpix S01 USB Cover Replacement: paso 3, imagen 1 de 3 Coolpix S01 USB Cover Replacement: paso 3, imagen 2 de 3 Coolpix S01 USB Cover Replacement: paso 3, imagen 3 de 3
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    • On the bottom of the camera, locate the USB port.

    • Gently slide the USB cover off of the camera with your fingers or tweezers.

    • You can replace the USB cover by purchasing one from a local electronics store or online at iFixit.com.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Fernando Ochoa

Miembro Desde 10/13/15

113 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 10

Todo El Tiempo: 394