Repara tus cosas Comunidad Tienda

Canon Powershot SX10 IS Lithium Ion Battery Replacement

Introducción

The lithium battery (CR1220) needs to be replaced when the date and time stamp will not stay set, or the camera is still prompting the user to change the batteries after the AA batteries have been replaced.

Qué necesitas

  1. Canon Powershot SX10 IS Lithium Ion Battery Replacement, Lithium Ion Battery: paso 1, imagen 1 de 1

    • Open the door. Release the catch by sliding it towards the side of the camera.

    • Then slide the door towards the front of the camera.

    Editar

  3. Canon Powershot SX10 IS Lithium Ion Battery Replacement: paso 2, imagen 1 de 3 Canon Powershot SX10 IS Lithium Ion Battery Replacement: paso 2, imagen 2 de 3 Canon Powershot SX10 IS Lithium Ion Battery Replacement: paso 2, imagen 3 de 3

    • Remove AA batteries.

    • Using a fingernail or iFixit opening tools to pry up the battery cradle.

    • Remove CR1220 battery from the cradle.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 17

Ultimos 30 días: 76

Todo El Tiempo: 3,328