Canon PowerShot SX260 HS Motherboard Replacement
Qué necesitas
-
-
There are a total of 6 (3mm) external screws that will need to be removed; 2 on the left side, 2 on the bottom, and 2 on the right side.
-
1.) Remove the 2 screws on the left side
-
2.) Remove the 2 screws on the bottom of the camera.
-
3.) Remove the 2 screws on the right side of the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
2 comentarios
Internal clock battery is under circuit board on right side of lens as seen in photo for Step 9. See 2:48 - 3:19 in this video: https://www.youtube.com/watch?v=Awmm6hDm....