Repara tus cosas Comunidad Tienda

Canon PowerShot SD1400 IS USB Port Replacement

Introducción

USB Port can be damaged from force exertion on the pins which can prevent it to connect to an external device. This guide will show the steps to replace the USB port in the device.

Qué necesitas

  1. Canon PowerShot SD1400 IS USB Port Replacement, USB Port: paso 1, imagen 1 de 3 Canon PowerShot SD1400 IS USB Port Replacement, USB Port: paso 1, imagen 2 de 3 Canon PowerShot SD1400 IS USB Port Replacement, USB Port: paso 1, imagen 3 de 3

    • Remove the four 2mm Phillips #00 screws on both sides of the camera.

    Editar

  2. Canon PowerShot SD1400 IS USB Port Replacement: paso 2, imagen 1 de 1

    • Remove the single 4mm Phillips #00 screw from the bottom.

    Editar

  3. Canon PowerShot SD1400 IS USB Port Replacement: paso 3, imagen 1 de 1

    • Remove the front face panel off of the camera.

    Editar

  4. Canon PowerShot SD1400 IS USB Port Replacement: paso 4, imagen 1 de 1

    • Remove the rear panel of the camera.

    • The user interface panel, side and bottom panel of the camera may fall down by itself while you are taking the rear panel of the camera.

    Editar

  5. Canon PowerShot SD1400 IS USB Port Replacement: paso 5, imagen 1 de 1

    • Remove the 3mm Phillips #000 screw from the top of the camera.

    Editar

  7. Canon PowerShot SD1400 IS USB Port Replacement: paso 6, imagen 1 de 1

    • Pry the golden ribbon cable from the motherboard with a plastic opening tool.

    • A screw will be visible underneath the golden ribbon after prying it.

    Editar

  8. Canon PowerShot SD1400 IS USB Port Replacement: paso 7, imagen 1 de 1

    • Remove the 3mm Phillips #000 screw from the motherboard.

    Editar

  9. Canon PowerShot SD1400 IS USB Port Replacement: paso 8, imagen 1 de 1

    • Use a plastic opening tool to flip up the retaining flap on the ribbon cable ZIF socket.

    Editar

  10. Canon PowerShot SD1400 IS USB Port Replacement: paso 9, imagen 1 de 2 Canon PowerShot SD1400 IS USB Port Replacement: paso 9, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Unplug the small chip from the face of the camera using a pair of tweezers.

    Editar

  11. Canon PowerShot SD1400 IS USB Port Replacement: paso 10, imagen 1 de 1

    • Remove the 3mm Phillips #000 screw from the rear face of the camera.

    Editar

  12. Canon PowerShot SD1400 IS USB Port Replacement: paso 11, imagen 1 de 1

    • Remove the top panel from the camera.

    Editar

  13. Canon PowerShot SD1400 IS USB Port Replacement: paso 12, imagen 1 de 1

    • Pry the golden ribbon cable attached to the USB port using a plastic opening tool.

    Editar

  14. Canon PowerShot SD1400 IS USB Port Replacement: paso 13, imagen 1 de 1

    • Remove the 3mm Phillips #000 screw located at the top right of the USB port.

    Editar

  15. Canon PowerShot SD1400 IS USB Port Replacement: paso 14, imagen 1 de 2 Canon PowerShot SD1400 IS USB Port Replacement: paso 14, imagen 2 de 2

    • Remove the USB port.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 5 otros colaboradores

Faris Rezwan

Miembro Desde 05/21/18

457 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

IUPUI, Team S1-G2, Harley Spring 2018 Miembro de IUPUI, Team S1-G2, Harley Spring 2018

IUPUI-HARLEY-S18S1G2

7 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 321