Partes

No se requieren partes.

  1. Remove the two screws from the side panel closest to the camera lens.
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

    Agregar Comentario

  2. Remove the two screws from the camera bottom panel.
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

    Agregar Comentario

    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

    Agregar Comentario

    • Remove the small cover panel and attached wrist strap mount.

    Agregar Comentario

    • Remove the front cover by gently pulling it away from the camera body.

    Agregar Comentario

    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

    Agregar Comentario

    • Using the spudger, take off the shutter button by prying the small tab on the front side of the camera.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Miembro Desde 19/01/12

486 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 8-18, Maness Winter 2012 Miembro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 891