Partes

No se requieren partes.

  1. Unscrew five Phillips screws using a #0 Phillips screwdriver.
    • Unscrew five Phillips screws using a #0 Phillips screwdriver.

    • One screw is on upper right corner of the back panel.

    • The other four screws are on the bottom of the camera.

  2. Open the memory card cover by moving the slide switch toward the top end of of the camera.
    • Open the memory card cover by moving the slide switch toward the top end of of the camera.

    • Remove the memory card from the slot.

    • Remove the rear cover from the rest of the camera.

    • This may require gentle rocking of the case to free it.

    • Unscrew the four Phillips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.

    • Free the front cover from the rest of the camera.

    • The cover may require gentle rocking to remove.

Linea de Meta

Una persona más ha completado esta guía.

Nathan Balcom

Miembro Desde 21/01/10

81 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 16-28, Maness Winter 2010 Miembro de Cal Poly, Team 16-28, Maness Winter 2010

CPSU-MANESS-W10S16G28

4 Miembros

8 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,443