Canon EOS 30 Top Panel Replacement

Sterling Vinson y 13 otros contribuidores

Última actualización: February 20, 2020

10 minuto

Fácil

Guía Destacada

Introducción

Ir al paso 1

The top panel can be safely separated from the camera body, but it will remain attached by several wires and a ribbon cable. Separating the top panel allows access to several important components.

Qué necesitas

Herramientas

Phillips #00 Screwdriver

Paso 1 Front Panel

Canon EOS 30 Top Panel Replacement, Front Panel: paso 1, imagen 1 de 1

Remove the two 4.8 mm black screws above the lens on the front of the camera.

Editar

Paso 2

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Editar

Paso 3

Remove the 4.8 mm black screw on the left side of the camera.

Editar

Paso 4

Remove the front panel by lifting it away from the camera's body.

Editar

Paso 5 Top Panel

Canon EOS 30 Top Panel Replacement, Top Panel: paso 5, imagen 1 de 1

Slide the outer eyepiece upward to remove it.

Editar

Paso 6

Remove the two 4.75 mm black screws located on the top of the camera.

Editar

Paso 7

Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Editar

Paso 8

Slowly separate the top panel from the camera by pushing it upward.
Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Editar