Introducción

Removing the bottom panel is safe and only requires a screwdriver.

Partes

No se requieren partes.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Agregar Comentario

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Agregar Comentario

  • Remove the 4.8 mm black screw on the left side of the camera.

Agregar Comentario

  • Remove the front panel by lifting it away from the camera's body.

Agregar Comentario

  • Remove seven 4.25 mm black screws on the bottom panel.

Agregar Comentario

  • Remove the bottom panel.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 8-8, Regan Spring 2011 Miembro de Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 12

Todo El Tiempo: 1,561