2015 Nissan Pathfinder Rear Windshield Wiper Replacement

Última actualización: December 11, 2023

4 minuto

Muy fácil

Introducción

This guide will provide simple step by step directions on how to remove and replace the rear windshield wiper blade on a 2015 Nissan Pathfinder. Due to adverse weather and wear and tear on windshield wipers, blades should be replaced every 6 months. It would be beneficial before starting this guide to purchase the correct replacement blade. I have attached a link to the blade used for this guide under the tools section. It may also be useful to familiarize yourself with the different parts of the windshield wiper blade and arm before beginning.

Qué necesitas

Partes

5Plus Automotive Rear Wiper Blade
Enlace de afiliado
Disponible en venta en Amazon
Ver

iFixit gana una comisión si finalizas una compra usando estos enlaces.

Paso 1 Rear Windshield Wiper

2015 Nissan Pathfinder Rear Windshield Wiper Replacement, Rear Windshield Wiper: paso 1, imagen 1 de 2

2015 Nissan Pathfinder Rear Windshield Wiper Replacement, Rear Windshield Wiper: paso 1, imagen 2 de 2

Gently life the wiper up and away from the windshield in an upright position.

Editar

Paso 2

Using your finger and thumb, lift the wiper blade upward from the base.
The wiper should be sticking out and away from the windshield.

Editar

Paso 3

2015 Nissan Pathfinder Rear Windshield Wiper Replacement: paso 3, imagen 3 de 3

Locate the pivot block at the end of the wiper arm that connects to the blade.
Pull the blade away with adequate force to remove the blade completely.

Editar

Paso 4

Acquire the replacement blade and remove the rubber yellow protector.

Editar

Paso 5

2015 Nissan Pathfinder Rear Windshield Wiper Replacement: paso 5, imagen 3 de 3

Locate the thin notch in the center of the replacement blade.
Locate the corresponding rounded port on the wiper arm.
Insert the notch into the arm and push together with mild force to attach the wiper blade to the arm.
When attaching the wiper blade to the arm, a clicking sound should be heard to ensure it is correctly assembled.