Introducción

En el momento de escribir esta guía, OS X 10.5 Leopard era la versión actual de Apple. El sistema operativo más nuevo de Apple es OS X 10.10 Yosemite. El procedimiento de instalación debería ser relativamente similar al de las versiones anteriores, sin embargo, primero deberá crear un Disco de recuperación de Yosemite utilizando esta herramienta.

Instale Mac OS X v10.5 Leopard en un nuevo disco duro.

Inserta un disco de instalación Mac OS X v10.5 Leopard en tu unidad óptica.
  • Inserta un disco de instalación Mac OS X v10.5 Leopard en tu unidad óptica.

  • Mantenga presionada la tecla "opción" y reinicie la computadora para que aparezca el menú de opciones de arranque.

  • Para comenzar la instalación, haga clic en el icono del disco de instalación en el menú de opciones de arranque.

Agregar Comentario

Cuando se le solicite, seleccione su idioma y haga clic en el botón de flecha para continuar. Cuando se le solicite, seleccione su idioma y haga clic en el botón de flecha para continuar.
  • Cuando se le solicite, seleccione su idioma y haga clic en el botón de flecha para continuar.

Agregar Comentario

Después de cargar el instalador, será recibido por una ventana de bienvenida. Seleccione "Utilidad de disco" en el menú desplegable de Utilidades.
  • Después de cargar el instalador, será recibido por una ventana de bienvenida.

  • Seleccione "Utilidad de disco" en el menú desplegable de Utilidades.

Agregar Comentario

Seleccione su nuevo disco duro de la columna izquierda en la Utilidad de Discos.
  • Seleccione su nuevo disco duro de la columna izquierda en la Utilidad de Discos.

  • El tipo de tabla de partición correcta debe establecerse para su disco duro.

    • Si se trata de un disco duro nuevo, es posible que no tenga un tipo de partición.

    • Para una máquina basada en Intel, debe tener una "Tabla de particiones GUID" en la lista.

    • Para una máquina basada en Power-PC, debe tener "Apple Partition Map" en la lista.

  • Si el tipo de partición incorrecto está en la lista, continúe con el siguiente paso para eliminar y volver a crear la partición. De lo contrario, continúe con el paso 8.

  • Advertencia: al eliminar la tabla de particiones, se borrará todo el contenido de la unidad.

Agregar Comentario

Los dos pasos siguientes solo son necesarios si la partición de su unidad está configurada incorrectamente. Al borrar una partición, se borrará definitivamente toda la información almacenada en el interior. Seleccione la partición en la unidad y haga clic en el botón "-". Cuando se le solicite, haga clic en el botón "Eliminar" para eliminar las particiones existentes de la unidad.
  • Los dos pasos siguientes solo son necesarios si la partición de su unidad está configurada incorrectamente. Al borrar una partición, se borrará definitivamente toda la información almacenada en el interior.

  • Seleccione la partición en la unidad y haga clic en el botón "-".

  • Cuando se le solicite, haga clic en el botón "Eliminar" para eliminar las particiones existentes de la unidad.

  • Una vez que se hayan eliminado las particiones, haga clic en el botón "Opciones ...".

Agregar Comentario

Seleccione el esquema de partición requerido para su máquina: Seleccione "Tabla de particiones GUID" para máquinas basadas en Intel. Seleccione "Apple Partition Map" para máquinas basadas en PowerPC.
  • Seleccione el esquema de partición requerido para su máquina:

    • Seleccione "Tabla de particiones GUID" para máquinas basadas en Intel.

    • Seleccione "Apple Partition Map" para máquinas basadas en PowerPC.

  • Haga clic en Aceptar."

  • Presione el botón "+" para agregar una nueva partición.

  • Presione el botón "Aplicar".

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Haga clic en la pestaña "Borrar".
  • Haga clic en la pestaña "Borrar".

  • Elija el formato de Volumen (recomendamos "Mac OS extendido (con registro)").

  • Seleccione un nombre para la unidad.

Agregar Comentario

Escriba un nombre para la unidad. Apple nombra sus unidades "Macintosh HD" de fábrica.
  • Escriba un nombre para la unidad. Apple nombra sus unidades "Macintosh HD" de fábrica.

  • Haga clic en "Borrar".

Agregar Comentario

Aparecerá una ventana de advertencia y le preguntará si desea continuar con el proceso de borrado.
  • Aparecerá una ventana de advertencia y le preguntará si desea continuar con el proceso de borrado.

  • Haga clic en "Borrar" en la ventana de advertencia que apareció.

Agregar Comentario

Una vez hecho el borrado, salga de Disk Utility.
  • Una vez hecho el borrado, salga de Disk Utility.

Agregar Comentario

Después de salir de la Utilidad de Discos, continúe con la instalación haciendo clic en el botón "Continuar". Se abrirá una ventana y se le preguntará si acepta el Acuerdo de licencia del software.
  • Después de salir de la Utilidad de Discos, continúe con la instalación haciendo clic en el botón "Continuar".

  • Se abrirá una ventana y se le preguntará si acepta el Acuerdo de licencia del software.

  • Acepte el Acuerdo de licencia del software haciendo clic en el botón "Aceptar".

Agregar Comentario

Asegúrese de seleccionar el disco duro correcto como destino de instalación.
  • Asegúrese de seleccionar el disco duro correcto como destino de instalación.

  • Haga clic en "Continuar" para continuar con la instalación.

Agregar Comentario

Ahora estamos listos para instalar Mac OS X v10.5 Leopard en el disco duro. Antes de continuar con el siguiente paso, asegúrese de que todas las configuraciones de instalación sean correctas.
  • Ahora estamos listos para instalar Mac OS X v10.5 Leopard en el disco duro. Antes de continuar con el siguiente paso, asegúrese de que todas las configuraciones de instalación sean correctas.

  • Haga clic en "Instalar" para comenzar la instalación.

Agregar Comentario

El instalador verificará el disco DVD de origen antes de comenzar el proceso de instalación.
  • El instalador verificará el disco DVD de origen antes de comenzar el proceso de instalación.

  • Durante este paso, verá un botón "omitir". No es necesario verificar el disco, y se puede usar el botón "omitir". Sin embargo, si nunca antes ha usado su disco, o no lo ha usado recientemente, es muy recomendable que lo revise.

Agregar Comentario

Leopard ahora se instalará en el disco duro.
  • Leopard ahora se instalará en el disco duro.

  • El proceso de instalación puede variar entre media hora y una hora.

Agregar Comentario

Si está instalando Leopard en un disco comercial, omita este paso.
  • Si está instalando Leopard en un disco comercial, omita este paso.

  • Si está instalando una versión OEM de Leopard, debe instalar las aplicaciones iLife y otro software desde el Disco de instalación de aplicaciones.

Agregar Comentario

La instalación fue exitosa. Haga clic en "Reiniciar" para reiniciar la computadora.
  • La instalación fue exitosa. Haga clic en "Reiniciar" para reiniciar la computadora.

  • En este punto, ha terminado con la instalación de Mac OS X.

Agregar Comentario

Conclusión

Mac OS X Leopard ahora debería estar recién instalado. ¡Disfrutar!

434 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

0%

¡ irlanda nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Arthur Shi

Miembro Desde 03/01/18

11,518 Reputación

86 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

114 Miembros

5,921 Guías creadas

I replace Toshiba MK1231Gal dard disk based on instruction on yutube http://www.youtube.com/watch?feature=pla...!

the problem is that when I try to install osx, I cant format the disk

I got notice input, output error, when try to make a partition or try anything with disk utility

I own MacBook air 1237

Iztok - Contestar

I replace Toshiba MK1231Gal dard disk based on instruction on yutube http://www.youtube.com/watch?feature=pla...!

the problem is that when I try to install osx, I cant format the disk

I got notice input, output error, when try to make a partition or try anything with disk utility

I own MacBook air 1237

Iztok - Contestar

yes, me too...did you get it fix? please share how.

jay zee -

A small pointer for any who have the same issue. I put in an entirely new 2TB WD sata drive and then preformed a fresh install of snow leopard onto it. When I got to the section to choose which drive to install to there was no drive image.

I clicked at the top on disk utility, then picked the drive, clicked erase and erased the drive. THis actually formats it into a mac format. after this I closed disk utility and voila the drive was now visible and installation could commence.

Good luck

Sam - Contestar

This guide was awesome!

Thank you!

staplesjoel - Contestar

This Mac OS X Install Guide is really outdated. When using a Recovery disk to install Mavericks, OS X just told me it couldn't install Mavericks. Didn't tell me why, it just told me it couldn't do it. I did something like this:

1. Get a USB or Firewire HD enclosure. Use the iFixit HD Replacement Guide to put your new HD into your iMac and put your old HD into the enclosure.

2. Plug in the enclosure and its USB or firewire cable to your iMac.

3. Hold down the option key on your keyboard and turn on your iMac. When it boots, it should recognize your old HD in the enclosure and give you the option to boot from that drive. Select that drive. It's just like booting when the drive was still in the iMac but maybe a little slower.

4. Now go to the App Store and Download and install Mavericks. You'll need to select "Show all Disks". You may need to use Disk Utility to format or erase your new HD if it doesn't show up. Use Migration Assistant to transfer apps and data from your old HD to your new HD in the iMAC.

Wade Bick - Contestar

Thanks for helping others! This install guide is specifically for Mac OS X 10.5 Leopard. We are working to make guides for installation of the more current OS's, but they haven't been completed at the current time.

Mike -

Hi, my questipn is: i have to insert the os cd before installing the new hard drive?

Miguel Yanez - Contestar

You do not need to install the disk prior to installing the Hard Drive.

Mike -

I need help. I have 10.5.8 on my macbook. My hard drive is messed up so I cant erase the hard drive as the erase button is greyed out. So I am trying to format everything in my macbook and reinstall osx. But I got 10.6 only. Please advise how to erase everything on hard disk and installing clean osx on macbook? Is anything I should know?

Ahmd Faruq - Contestar

Depending on your MacBook, you may be able to install Mac OS X 10.6 onto that machine. You will need to boot up from that disk prior to doing the erase of the hard drive as well.

Mike -

After installing new HDD in IMAC...power on gives a yellow screen. Is it possible to get to formatting utility from this point? I tried a command R no luck.

2nd attempt I tried inserting Snow Leopard disk, tried 'option' key at power on, tried Cmd-R, tried no key; disk goes into a cycling routine but nothing appears on screen.

Rich - Contestar

I think what's Happening Here is a lot of people aren't formatting drive before hand. Old drive dies new one pop in and your good. This is not the case Mac, Kaspersky uses a tool to allow you to make a bootable disk from your usb for your Mac or your PC. Use the tool that used because there are a lot of viruses out there. That what you want to do since you don't want to rip your Mac apart is download Ubuntu ISO file learning is a bootable ISO you can use FAT32. Once you do that put it in the USB drive boot from the USB. Sorry forgot to stop you need to get rid of your vram clear option RVP or something. Next is booted off the USB having its command option r. Now you want to format Drive using Ubuntu. Yes Ubuntu free where is more powerful that are Mac OS X and it's free. Now you have to remember using a Mac which is a Linux machine and it's grub so the file extension is htls. Grub you do not format NTFS…

Kapsol -

Once you've done that you need to os. So you can pay the $20 for it which is a joke you could download it from a torrent I'd be very careful doing that or if you have a 2011 that came with it manhole command-r now the problem here is it will not allow you to connect. Therefore you need to open your router settings if you have an old router that would be best.

Kapsol -

Set that router up to connect to an open DNS so where it says DNS connection you want to use Google DNS OpenDNS Mike's DNS ect Google DNS in OpenDNS are the best. And then you have to hold command-r and it now will allow you to connect to get the file. Once that gets the file it'll start the installation process your screen will turn white let it turn white holdzkom and wipe out the vram again reboot redo it and your set. And now if you're still having problems do a hardware check I think that's holding the just hold D at start up. Keep hope alive. You guys can donate for all my time put into this BS very awesome even $0.10 a penny anything be better than nothing kapsol101@yahoo is my email and PayPal if you have problems just email me now I'm always here to help. Unless I die like Steve Jobs did cuz karma's a bch.

Kapsol -

I have a MacBook Early 2009 A1181 Model. Just ordered a SSD from Amazon, and have all of my stuff backed up on the external hard drive I use for backing up. I still have all of my installation CDs, but want to make sure of the tools I need for this. I know I take the battery out, and that metal cover in that area, but for my Mac I'm not sure if it would be the same tools since it is older than what you guys have.

Also, one quick question, can I change the processor in this? I will be switching out the ram soon, likely after tax season, but I want to get a faster processor if possible.

rtaillon1 - Contestar

I replaced the original 320 GB OEM Apple/Hitachi drive in my 2007 iMac with a 3 TB Hitachi/HGST drive today using the iFixit guide. To reinstall OS X, I used an Apple USB thumb drive, which after reformatting with Disk Utility, is currently downloading Lion from Apple. I also decided to run the formatting/reinstallation before reassembling the front bezel and glass, in case my son and I did something wrong in the drive replacement. Fortunately it looks like we did everything right.

recmsoj - Contestar

Thought that I would add this comment in case someone has similar situation. MBP late 2011 replaced HD with SSD (Samsung 850 EVO). The angle on the install was that my Time Machine and Old HD were encrypted. When encrypted (Time Machine and CCC clone of drive), the Recovery HD is not setup (not sure details, perhaps this is how encryption works). Either way, setting up a bootable Install USB drive (8 gig minimum for Yosemite) was necessary. Sequence was full backup (I did both Time Machine and CCC to be sure)., create bootable USB installer drive (Google it, I used the Disk Utility method). Shut Down, Reboot with Command-R, plug in USB drive, format new disk, load Yosemite from USB to new disk, then shut down, Restart with Command-R, then load Time Machine backup. The clean Yosemite install setup the Recover Partition on new drive and the files copied from Time Machine restored system to original state without messing with newly created Recovery partition. Then encrypt new drive and you are done.

Brian - Contestar

Hi,I am getting ready to replace the drive in my early 2008 20" iMac. I have a Time Machine backup but do not have the OS installation disks. How can I get replicate my current drive contents to the new disk?

Jenerationnyc - Contestar

Thank U, Clear I would like to test and check. :)

Sasteam Vander - Contestar

please mention Customize ,that can save many GB of disk space with unwanted junk.

Andrew Waddington - Contestar

How do you install 10.5 over 10.7) (which is on a 2nd partition) to downgrade to 10.5 due to having to use some software limited to 10.5?

Greg Brooker - Contestar

How do you install 10.5 over 10.7 (10.7 is on a 2nd partition) to downgrade to 10.5 due to having to use some software limited to 10.5.

Greg Brooker - Contestar

I don't have a Snow Leopard disc. I downloaded Snow Leopard to an external hard drive, and connected it to the mac before starting up and pressing the Option Key. All I get is a grey screen and a cursor. Is there a way to format my new 1TB hard drive using software loaded onto an external drive?

arleyrose - Contestar

I don't have a Snow Leopard disc.

I downloaded it from the apple website and loaded the MacOSXUPD10.6.8.pkg onto an external hard drive and connected it to the iMac. I started it up, pressing the option key down, and all I get is a grey screen and a cursor. Is there a way to format my new 1TB internal hard drive using the software loaded onto an external drive? Kinda new to this :(

arleyrose - Contestar

I just brought a PowerBook G4 it currently runs os x 10.4.11 how do I update it to 10.5 without the disco considering I can't find one anywhere!

diggadog - Contestar

OK - I replaced my HD for my Mac Book Pro 15" #1211 and reloaded software and everything works... but the software upgraded to OSX Lion and again everything works... but it won't up grade to anything beyond Lion. What am I missing? Is it a hardware restriction or some other problem?

pmoretti - Contestar

I replace on 2009 Imac my old HHD with a new SSD 1TbThen the screen was blank. i had to insert the Snow Leopard CD hold on option button and open the Utilitys and chose the new ssd to install the Snow Leopard.Then i did ll the updates and downlead and install all Lion,Maverik,Yosemit ,.and it works

Daniel - Contestar

is anyone fix Input/Output error yet? Please help!!

jay zee - Contestar

Where can I download Mac OSX Leopard 10.5?

gitico2006 - Contestar

Thank you for the guide. My 2008 24 inch imac has been use as a paperweight for the past 4 years after the HD failed. I replaced it with a 27 inch imac, but I decided to have go at fixing the old one. I replaced the 320 WD HD with a WD 2 TB today. All went well until trying to reinstall the original OS (Snow Leopard) and could not get the computer to see the new HD. Your guide saved the day and now have the OS installed. Thanks again.

John Gardner - Contestar

wen i am installing asking the id & password, if i give new id it not accepting. i am totally struck please help me

Sathish m - Contestar

So you can't use a hard already in the Dell gx280? Or if you can does it delete all the information that you used before trying to install mac os on your Windows pc? Probably stupid but really curious? This dell has been a soldier for me but I'm not able to purchase a Mac right now and want that operating system so bad.

Ryan Ridgeway - Contestar

There is no normal way to install Mac OS on normal PC, for limits of Apple. You can Google "Hackintosh" for installing Mac OS on a Windows PC.

ycwei982 -

I am trying to re-install OS X Leopard onto a Macbook A1181 and can get to the picture in Step one less the HD option. When I click on the Install Disk the drive starts then the Laptop re-boots. It never gets to step two. I can hear the HDD spinning and have checked the RAM but do not know what to check next other than try checking the HDD to make sure it is good.

khutch9999 - Contestar

Hi,

I printed out this guide before I replaced my SSD, however the graphics for Steps 6 to 17 did not print - the graphics for Steps 1 to 6 were fine - any ideas to solve this issue?

Best wishes,

GaryB

Gary Brooker - Contestar

How would i do this without a functioning optical drive

James Reynolds - Contestar

Need some help. Installing High Sierra on my MacBook Pro Mid 2009 - did all the steps to put it on a brand new external drive. It is plugged into my computer, I can see the High Sierra install when it comes on and when I click it it goes to a grayish/white screen with a circle slash no symbol, like the ghostbusters, then use sits there and does nothing.

Robert Warfield Jr - Contestar

It’s normal, The minimum hardware requirement for High Sierra is a MacBook Pro Mid 2010.

So, go to make a new usb drive with Sierra.

Anthony Fassler -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 293

Últimos 7 Días: 1,882

Últimos 30 Días: 8,314

Todo El Tiempo: 1,121,926