Repair guides and support for your Mitsubishi TV, no longer produced by Mitsubishi Electric.

Preguntas 83 Ver todo

Blue Screen for all inputs

Have blue screen for all inputs on Mitsubishi LT-46265. Have tried all obvious fixes including resets multiple times. Screen works for menus and Internet so that's not it. When resetting, TV recognizes each HDMI device when reconnected but won't display video or audio. Trouble shooting clearly identifies problem is with TV. Need to know if it can be repaired or needs to be thrown out.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 4

Comentarios:

Was anyone able to find a resolution to this? Test picture is good, menus come up but all blue screens for my inputs

por

I found that I could only get a video with an hdmi connection. I converted to that. I feel like there are too many "smart" controls in this model of tv. If someone solves this problem please let me know too!

por

Out of nowhere, none of my hdmi ports work (e.g. DVD player and computer input).

The port for the Wii works though.

Is this this fixable or is this toast?

por

Agregar un comentario

3 Respuestas

Solución Elegida

Paul Avery, start by A/V Reset all Inputs - Press front panel <INPUT> and <VOL (arrow Left)> buttons at the same time and hold for 10 seconds. This should work for your chassis as well "Built into many models is a “Test Picture” that can be accessed from the customer menu. Press <MENU> select “Picture+” then “Test Picture.” A photograph of the “Lady” will be displayed. If a TV picture performance problem exists, it should be evident. Otherwise, the test picture will have demonstrated that the set is capable of a quality display and the problem is likely due to a signal source or other external cause." If you can check to see what your error log listed for an error that occurred in the past.To access the Error Code Log: Press <MENU> <3-5-6-4>

I would not throw it out just yet:-)

Update (09/27/2015)

Check the fuses (blue) for continuity and check the voltages (red) on the connectors. Let us know what you get.

Block Image

Fue útil esta respuesta?

Calificación 1

Comentarios:

oldturkey03, Thanks for the suggestion. Tried it but no luck. Test picture works just fine. Error log lists Usage Time: 1337 Hrs Code: 0048 Status: Happened.

Any other ideas?

por

I am sure we can come up with some more stuff. You pretty good in taking stuff apart? Remove the back on your TV and lets look at the boards. Luckily we at least know that the LCD is ok. The rest are all just board issues. Error code 0048 is usually related to 3.3 and 5v line short which is a problem with the main board. Need images of your boards to see if this is a capacitor issue or something else. Post some with your question. Here is the guide for doing that Adding images to an existing question I should have the schematic for this chassis and I will see if I can find where we can check the voltage. No giving up on here:-)

por

I now have sound that corresponds to my WII game plugged into the tv however I get no video. I tried a; DVD player, PS2 and a WII game system. No luck. It prompts me to identify each new system however then it will play the sound for it but no video. I tried to hook it up to an "Antenna" and I will get static and some moving images, not related to the game system. I have not tried connecting via a HDMI cable just through the yellow RCA input. I am baffled. It seems like everything works, just not the connection via RCA cables. I will have to try HDMI cables.

por

Did anyone ever get a resolution to this

por

My Mitsubishi 55 lt-55264. It has to be reset every 2 years exact but now it will not rest.

It show blue bar is on yellow flashing 19 times then repeat. I am stumped this time. Every time it shuts down because of data like wrong colors or data is interfering. Then shuts down. Trying to update or reset with software but this time will not set to factory with snow screen then restart again. I'm stuck

Patrick

por

Agregar un comentario

It's the ballest change it and your tv won't shut off that's if you don't hear the fans if fans arnt running the ballest gets hot and shuts down and if the fans are running it's just a bad ballest

Fue útil esta respuesta?

Calificación 0

Comentarios:

I have a similar problem in that none of my hdmi ports work (e.g. DVD player and computer input).

The port for the Wii works though.

Is this this fixable or is this toast?

por

Agregar un comentario

Hey guys use your component wires and rca wires should be fine

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Paul Avery estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 9

Últimos 7 Días: 113

Últimos 30 Días: 640

Todo El Tiempo: 23,155