Repara tus cosas Comunidad Tienda

Quinta generacion de iPhone. La reparación de este dispositivo es fácil y requiere destornilladores, herramientas de hacer palanca, y paciencia. GSM/CDMA /16, 32, o 64 GB / Negro o Blanco.

Preguntas 2193 Ver todo

Opciones

Impossible to restore after battery replacement

Hi.

My iPhone 4s worked well except the fact that the battery was very used.

I change my battery by following these instructions and I succeed to disassemble and reassemble my iPhone without any difficulty. However, after having turned on my device, the cellular connection didn't work with the new battery. As written in the tutorial, I tried to restore the device using iTunes (in DFU mode and not). This message appear: "the iphone could not be restored: an unknown error occurred (1)".

What is the solution to solve this problem ?

Thank you for your answer.

Bredin54

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

It looks as though an IC chip has been removed. Shown in red

ps. Those battery connector screws are in mighty rough shape. Might want to get them replaced before they are completely rounded on top.

Block Image

Fue útil esta respuesta?

Sí No
Puntuación 1

2 comentarios:

Thank you st3v3w.

Is it possible to repair it ?

- de

This is the Baseband Power IC U18_RF .

This chip supplies the power to baseband IC.

If its missing then your phone will have no baseband.

You can purchase the part on ebay. http://www.ebay.ca/sch/i.html?_from=R40&...

You would need a good soldering iron and flux or soldering station with heat gun and some steady hands. if you are not confident with this your best bet is to bring it to a local shop to have it replaced for you or by someone with soldering experience.

- de

Agregar un comentario

Opciones

Pry damage. Show us your board.

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

Hi,

Thank you Jessabethany. But I am sorry, my english is not good enough and I don't understand your answer.

Do you want I send you picture of the problem ?

- de

yes---take a nice clear picture of your logic board. Especially of the dock connector (peel off the black sticker) and the edge of the board near the battery

- de

Agregar un comentario

Opciones

Hi,

Here are three pictures.

But I have not peeled of the black sticker. I am affraid do to something wrong. How to do ?

Thank you.

Block Image

Block Image

Block Image

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

bredin54 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 209