st3v3w

loudspeaker isn't working. have used 2 replacements plus 2 different dock connectors. Earphone jack is working perfectly. any...

Hi guys , So i have an Iphone 4 here which i was working on for a customer that stopped working and wouldn't restore. New pow...

Hi guys , I am repairing an IPhone 5 for a customer who recently had the screen replaced by a friend but since then the phone...

Ok so I have a water damaged IPhone 5c . I disassembled and cleaned with 99% alcohol but still nothing so i proceeded to remo...

If pressing your Recovery Keys at startup is not working then you will need a windows CD or USB to boot from and complete a fresh install .

If it cannot be grasped with tweezers you could use a little bit of krazy glue on the end of another jack and stick it to the one in the earphone jack being careful not to use to much and have glue stick to the plastic and you should be able to pull it out .

From my experience with macbook's with water damage , anytime the keyboard membrane has become wet it has been near impossible to fix the keyboard and usually resulted in having to replace the keyboard trackpad assembly. If you only used 99% isopropyl just give it a few days to see if it will evaporate from the keyboard membrane as it gets sealed in and can take some time to go away and is probably causing a short.

Where do you live Kevian ? There may be someone near you that could easily do this for you .

Sounds like there is pressure which is pushing up on the digitizer which can happen from the digitizer cable not being properly positioned or folded wrong . Could also just be cheap adhesive strips . Easiest way to solve this would be to use a liquid adhesive in the troublesome areas. Look for E7000 Glue on ebay . Once dry it acts like a strong and flexible adhesive that can be removed with heat in the future.

You could try entering recovery mode Press and hold Volume up, Home and Power buttons until the Samsung logo appears on the screen. Scroll to wipe data/factory reset by pressing the Volume down button. Scroll to Yes -- delete all user data by pressing the Volume down button. The phone will now reboot to the initial setup screen. Also try connecting to a computer to see if it is recognized , If nothing then your phone may have experienced some sort of a short overnight and may be damaged internally . If this is the case then i would suggested bringing it to a local repair shop for a diagnosis.

Unless you can find a similar TV for cheap and use the LCD from that then you may be out of luck most times these LCD's cant be purchased and if they can it can be more than the cost of the TV itself.

It will either be a connector issue or a faulty screen. Try cleaning the connections with 99% isopropyl and a fine brush and re-seating the connectors after they have dried . Please make sure the battery is disconnected when working on your phone .

If you are not getting any sort of picture through VGA or HDMI even after trying the function keys to switch displays you may have to swap your hard drive into another computer and solve the issue this way whether it being driver related or corrupt refresh.

I have dealt with this issue 4 - 5 times with water damaged macbooks and replacing the entire display assembly was the only fix that worked .