Xbox Series X 中心机箱组件更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 6

Paso 6

Remove the center chassis assembly

The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
Lift out the center chassis assembly to remove it from the shell.
During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

拆下中央底盘总成

中心底盘通过导向钉与外壳对齐。这些钉子需要从插槽中滑出，才能将机箱抬起。
握住中央底盘并将其拉向外壳顶部，将导向销与外壳分离。
提起中央底盘组件，将其从外壳中取出。
在重新组装过程中，确保将中央机箱降低到外壳中时，任何带状电缆都不会被夹住。

	[title] Remove the center chassis assembly
	[* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
-	[* black] Grip the center chassis and pull it towards the top of the shell, uncoupling the guide pegs from the shell.
-	[* black] Lift up the center chassis assembly to remove it from the shell.
-	[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.
+	[* black] Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
+	[* black] Lift out the center chassis assembly to remove it from the shell.
+	[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.