Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 27 guías que incluyen este paso.
Traduciendo paso 4
Paso 4
Unclip the back panel
-
Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base.
-
Pry up the back panel to release it from the locking clips.
[title] Unclip the back panel | |
[* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base. | |
- | [* black] |
+ | [* black] Pry up the back panel to release it from the locking clips. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.