Saltar al contenido principal

Xbox Series X 后面板更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 27 guías que incluyen este paso.

Inglés
Chino
Paso 5
Xbox Series X Back Panel Replacement: paso 0, imagen 1 de 2 Xbox Series X Back Panel Replacement: paso 0, imagen 2 de 2
  • Insert the flat end of a spudger into the gap between the back panel and the shell, near the right side of the base.

  • Pry up the back panel to release it from the locking clips.

将撬棒的平端插入后面板和外壳之间的间隙中,靠近底座右侧。

旋转外壳上的撬棒并向上拉后面板的底部以将其从锁定夹中释放。

[* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the right side of the base.
-[* black] Pivot the spudger on the shell and pull up on the bottom of the back panel to release it from the locking clips.
+[* black] Pry up the back panel to release it from the locking clips.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.