Saltar al contenido principal

Xbox Series X 后面板更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 27 guías que incluyen este paso.

Inglés
Chino
Paso 3
Xbox Series X Back Panel Replacement, Remove the back panel screws: paso 0, imagen 1 de 1
Remove the back panel screws
  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

使用 T8 Torx 螺丝刀卸下固定后面板的两颗 7.4 毫米螺丝。

在整个维修过程中,请跟踪每个螺丝,并确保它准确地回到原来的位置,以免损坏你的控制台。

[title] Remove the back panel screws
-[* red] Use a T8 Torx driver to remove the two 7.4 mm screws securing the back panel.
+[* red] Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.