Repara tus cosas Comunidad Tienda

Información sobre reparación y solución de problemas de la estación de energía portátil FixHub, la principal fuente de alimentación e interfaz de control de la línea de productos FixHub de iFixit. Lanzamiento en octubre de 2024.

Preguntas 20 Ver todo | 17 Piezas Comprar

Opciones

DFU in FS mode

My FixHub Portable Power Station bricked up. I tried to connect the station using DFU mode, guesing to rewrite firmware. When I connect the station, hear a chime that a USB device has connected to the computer. In Devices Manager I see new device DFU in FS mode, but on FixHub web console do not see any compatible device. Is there any possibility to upload firmware stright to STM32 using some dfu-util, not using web console?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
6 comentarios

I've forwarded your issue onto the iFixit team.

- de

@danj, thank you!

@audrius42400, Sorry this is happening. I'm checking in with the FixHub team to get next steps. I'll follow up as soon as I have an update.

- de

@audrius42400, Some browsers don't support the Web Serial communication protocols needed to communicate with the FixHub and update the FW. Have you tried running the web-console connection via either Brave, Chrome, Edge, or Opera browser? Cómo usar la consola web FixHub

- de

You right, Johnny. And you can easily check this by connecting a smart soldering iron. It is not my case. Thanks Johnny.

- de

It is interesting that the device is connecting but not recognizable. I would recommend that we RMA that unit so we can troubleshoot the issue. @Kris Rodriguez can help get that started for you.

- de

Mostrar 1 comentario más

Agregar un comentario

1 Respuesta

Filtrar por:
Más útil Más reciente Más antiguo
Respuesta Más Útil

Opciones

Dear all, not sure I will get replacement.

More light on it.

As you know, the portalbe power station do not work well with samsung phones like charging power bank. Doing research on it I bricked my portable power station. STM32 was dead. I know the mistake I did, checked surounding components, everything OK exept STM32. So I changed STM32 to new one and STM32 totaly empty now. So it's no wonder the station isn't recognized cause all three memory blocks are empty. I understand your reluctance to solve this problem remotely, but "Right to repair" ...

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Thanks for clarifying. That certainly impacts how we are able to proceed. Unfortunately, in order to load the FW from here additional equipment that is custom for the FixHub production line would be needed. As such we aren't able to send out that equipment to support you in this repair. At this time the best course of action we'd be able to take is either replacing the entire unit or we can send you a replacement PCBA. Please contact the customer service team via the form at the following link.

https://www.ifixit.com/customer-service-....

- de

Agregar un comentario

Añadir tu respuesta

Audrius estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 28

Todo El Tiempo: 147