Saltar al contenido principal

Información de reparación, desmontaje y solución de problemas de Steam Deck con pantalla LCD, una consola de juegos portátil fabricada por Valve, lanzada el 25 de febrero de 2022. Identificada por el número de modelo 1010.

Preguntas 20 Ver todo

Help identifying missing components

Hey all. Recently picked up a steam deck second hand from someone which isn't working after an SSD replacement. Turns out some SMD's have been knocked off the board. This is a F7A revision board. The parts missing can be found in the attached images. Any help would be huge.

Block Image
Block Image
Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

Lucky for you I have one of these boards kicking around that I use mostly for things like this. I took the capacitors off and measured out of circuit because capacitance readings are real finicky. And I almost lost one of them that launched itself onto my microscope light. Also pardon the crud this board was covered in thermal paste when I got it and I am still finding it in little crevices.

Block Image
  • Red is a resistor (I think) measured about 3.5 ohms on my meter.
  • Orange a capacitor that measured about 165 nano farad
  • Yellow is a capacitor that measured about 5.5 micro farad

Not sure of voltages and I didn't take the time to figure out sizes of components, but I figured the actual specs will be thew hardest the get anyway.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Thanks for getting this back to me! Just a question, is it possible that red could be an inductor?

- de

Agregar un comentario

Añadir tu respuesta

Joshua Turner estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 41