Saltar al contenido principal

Modelo A1181: procesador Core 2 Duo de 1.83, 2, 2.1, 2.13, 2.16, 2.2 o 2.4 GHz

Preguntas 1203 Ver todo

Battery will not charge, but works on AC

My MacBook has had water damage. but i works with ac. The battery will not charge. It will either say it is change for like 5 minutes and stop. Or it will show that there is no battery in.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Solución Elegida

The MacBook logic board charging area (left side of the logic board) is very sensitive to liquid spill. We see many machines that still works after a liquid spill but battery charging function is often altered. If you have no success with a known working battery after replacing the battery charging board then the logic board need to be replaced or repaired. A repair will cost you at least $200 if the logic board can be repaired

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

It could very well be the Magsafe board that is not charging:

MacBook MagSafe DC-In Board

http://shop.ebay.com/i.html?_kw=A1181%20...

or as in my case I changed the battery cable which contains some electronic that could be damaged by liquid. This cable tells the logic board if the battery needs charge, is present at all etc. Here it is:

MacBook Battery Connector/Sleep Sensor (non-Energy Star)

Just remember to get the correct version for your MB.

Imagen de MacBook Battery Connector/Sleep Sensor (non-Energy Star)

Producto

MacBook Battery Connector/Sleep Sensor (non-Energy Star)

$7.99

Imagen de MacBook MagSafe DC-In Board

Producto

MacBook MagSafe DC-In Board

$19.99

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Zack estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 15

Todo El Tiempo: 14,373