Repara tus cosas Comunidad Tienda

La HP ZBook 15 es una potente estación de trabajo móvil con capacidad de procesamiento avanzada. Lanzada en octubre de 2013, este ordenador tiene la potencia y la velocidad de un ordenador de escritorio en un paquete altamente portátil. Identificable por el número de modelo F1M31UT. Se puede acceder fácilmente a la mayoría de las piezas, lo que permite reparaciones rápidas y simples.

Preguntas 23 Ver todo

Opciones

Zbook turns off before POST due to display problem

Hello there,

I am currently trying to repair a ZBook 17. After plugging in the power adapter the leds blink for 3 seconds and it turns off again, the screen remains black.

After a while of troubleshooting i found that when I unplug the display cable from the motherboard OR from the display unit (and connecting an external VGA screen) it gets to POST.

Can this be caused by a bad display cable although it is causing no error when it reamins plugged in the motherboard and is disconnected only at the LCD? How can I determine what exactly is causing the issue? For all I know it could also be a bad LCD or even a problem with the graphics card or motherboard.

I don’t want to buy replacement parts before I know for sure what is causing the problem. Can I narrow it down further without buying any parts?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Hi @ardias ,

From your description, the problem appears to be in the display assembly.

The laptop works OK with an external monitor and the laptop video cable disconnected from the display assembly only.

This proves that there is no problem with the motherboard or GPU as the laptop turns on and there is a display and that there are no short circuits between the wires in the laptop video cable which may be causing the problem as it is still connected to the motherboard.

You could always satisfy yourself that the video cable is OK by using an Ohmmeter and check that each wire in the video cable has continuity from end to end and if they are all OK then all that’s left is the display assembly itself.

Also try searching online for (insert motherboard’s board number) schematic to hopefully find them. The board number is printed on the motherboard. This may also help.

Fue útil esta respuesta?

Sí No
Puntuación 3

2 comentarios:

Thank you @jayeff

I guess its the display then. Just want to avoid to buy a new one for 80 bucks if its not broken.

- de

@ardias Scrap the display and cable on this one, especially if you aren't sure - HP Z gear isn't cheap to get parts for if you wreck the motherboard. You can try the cable if you want, but be prepared to buy a display.

$80 for a display is cheaper then a Z motherboard.

- de

Agregar un comentario

Añadir tu respuesta

ardias estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 5

Todo El Tiempo: 214