Saltar al contenido principal

Lanzado en Julio de 2018 Versiones: Mi A2 (Global); Mi 6X (China)

Preguntas 41 Ver todo

GPS and Bluetooth not working after screen replacement

Hello there, a few months ago I replaced the screen of my Xiaomi A2. I also had to change the phone’s casing.

After some tests, however, I noticed that the bluetooth and the GPS were not working.

I can’t pinpoint what happened, since everything else is working fine and I can’t find a particular piece of hardware missing or apparently damaged.

Maybe I’ve missed some small detail. Thanks.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Respuesta Más Útil

Hi @valp ,

By not working do you mean that they couldn’t be turned on or that they showed no indications of receiving a signal?

Does the WiFi also not work?

If it is also not working or only working when the phone is placed nearly on top of the router then there maybe a problem with the WiFi/BT antenna connection. (The BT might also register if placed right next to a BT device)

Here’s the ifixit Xiaomi Mi A2 Sustitución Puerto USB guide. I realize that this is not the problem but the guide is useful as one end of the antenna connection is able to be seen in the image at Step.8 in the guide. You would have to trace it back to check if the other end was also connected securely if the end near the USB port was OK

The antenna connection is also visible in the image below. Look for the black cable with the silver connector coming down a channel on the left side the bottom of the image.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Just go and solve your problem

Mi a2 bluetooth problem solution

Hope this will help you

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Victor Dude estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 492