Saltar al contenido principal

Tablet PC de alto rendimiento de segunda generación lanzada por Apple en junio de 2017. Modelo A1670.

Preguntas 13 Ver todo

iPad in boot loop after home button replacement

Hello,

I have an iPad that we recently replaced the screen on, and then noticed that the home button wasn’t working. When we finally replaced that, it began boot-looping endlessly. Does anybody have a fix for this?

EDIT: I forgot to mention that as of now, we have tried a hard reset, and are now currently letting it completely drain and then trying to plug it in and boot it.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0

Comentarios:

I'd try if it boots with home button disconnected to start with.

por

Agregar un comentario

Kits de Reparación de Android

A new screen or battery is one kit away.

Comprar Ahora

Kits de Reparación de Android

A new screen or battery is one kit away.

Comprar Ahora

1 Respuesta

Not sure on iPads but on iPhones if the device does not have a home button connected to it this can cause this issue. Not sure but it’s possible even with the new button that the device can’t tell it’s connected. The new button should not make a difference other than Touch ID not working. Return to home should still work.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Cody Overman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 22