Saltar al contenido principal

The Shark Rocket HV301 is the second installment of vacuums in the 300 series. It is a two-in-one vacuum that comes with several attachments, making it capable of cleaning on different surfaces. Its sleek and lightweight design make it easy to maneuver around any household.

Preguntas 17 Ver todo

Brush Roll Not Turning On

The brush roll will not turn on at all anymore. There seems to be no power getting to it. If I take the stick part off and attach it directly to the canister, it works. Do I need to buy a new stick? Where can I get one?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 3

Comentarios:

The Underestimated seems to be right in my case, although, the female connection (on the motor part of mine, rather than the stick) that is the problem, is not cluttered with debris. Rather, it seems to be missing the connection piece altogether. The hole is just empty. Ugh…what to do now…

por

I hve this problem and shark are not interested. So stick shark dyson has better aftersales

por

I have a rocket hv380 it dosent have a belt on this model but rollers not turning can't work it out any suggestions please

por

Agregar un comentario

4 Respuestas

Solución Elegida

Hi,

It may be that the brush roll drive belt is broken.

Here is a link to the ifixit guide to repair / replace the brush roll. The belt is shown clearly in Step 8 of the guide.

If it is broken then here is a link to suppliers of the part.

Hopefully this is of some help.

Fue útil esta respuesta?

Calificación 3
Agregar un comentario

you have a loose wire in the extension handle part.

uplug the vacuum.

open up the handle and repair the torn / broken wire.

be sure to cover with electrical tape.

Fue útil esta respuesta?

Calificación 1

Comentarios:

Thanks for the answer except it is hard to know where on the handle it should be opened up. Pictures would be nice, but if not at least a good description of exactly where to open up. Thanks!

por

Agregar un comentario

You probably won't need a replacement part. I would start by checking the connections on the female side of the wand. I believe you will find that one more of the connections will have foriegn matter covering the contact points causing the problem. Please make sure your vacuum is unplugged from the power source before you clean the connections. Your welcome!

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

I had the same and I contacted shark and they sent a replacement foot part free of charge.

Fue útil esta respuesta?

Calificación 0

Comentarios:

Did you have to show them your reciept? I've lost mine and can't use the warranty due to that.

por

Agregar un comentario

Añadir tu respuesta

Carrie Pandya estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 27

Últimos 7 Días: 125

Últimos 30 Días: 608

Todo El Tiempo: 18,707