Rep: 23
3
1
The notebook does not think the internal HD by disk utility, I can boot from cd rom and the hd connected to the internal USB port, it is functioning normally. I installed another HD compatible and still does not recognize. It may be a defective cable or flex in the parent? Thanks.
Marco.
Es esta una buena pregunta?
Rep: 78.2mil
385
96
162
At this point I would try replacing the cable as the most likely and least costly part. On general principles try resetting the PRAM and SMC--link provided. If these don't work get back to us.
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
MacBook Pro 13 "Unibody Mid 2009 reemplazo del cable de la unidad de disco duro
Fue útil esta respuesta?
Glad you could understand the question because I can't.
Performed the procedures suggested and still nothing.
Yes, Rj is correct. I would replace the flex cable. +
Ultimas 24 horas: 1
Ultimos 7 días: 4
Ultimos 30 días: 5
Todo El Tiempo: 2,926
4 comentarios
Performed the procedures suggested and still nothing.
- de Marco
Could you restate the question. I just don't understand it as stated?
- de mayer
1. Question mark at startup.
2. No problem in HD.
3. In disk utility the internal hard drive does not appear.
4. However, the USB port it works normally.
4. CD-ROM also gives boot.
5. I think the problem is with the flex cable from the HD.
- de Marco
Guys, is not the flex cable problem, because the hd is running normally.
- de Marco