Problem

Rep: 1

3

Opciones

Problem

Hi my name is leandro i have a Ibook G3 14 and i was having a issue with the display so i tried to fix it puting a shim in the diplay chip but now after all my computer doesnt turn on after I finish and i dont no why. it was all ok before that i had problem with a blue and white cable near the Modem that was conecte to the keyboard palm rest or the turning on button the socket was out and i put it again i dont no why it does not turn on you think i forgot something else? thank you!!

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

6 Respuestas

Solución Elegida

rdklinc @rdklinc

Rep: 32.4mil

RDKL, Inc.

207

156

62

Opciones

I'm not sure I understand the description of the problem, but one thing I would recommend is keeping the computer open, i.e. just let the topcase/rest on top the board while it is plugged in. That way, you can verify your connections, try powering it on, unplug/plug in another connection, try powering it on, etc. Nothing is more frustrating that putting an iBook all the way back together only to realize something else is wrong and you have to go back in again.

Fue útil esta respuesta?

Sí No

Puntuación 1

QEII Student IT @qeiistudentit

QEII Student IT @qeiistudentit Rep: 4.8mil 28 30 5 · Answer 1 · 2009-12-13T10:12:01-07:00

Respuesta Más Útil

Rep: 4.8mil

28

30

5

Opciones

I would try soldering two wires to the contacts on the board and soldering the power button port to the end of the two wires.

Fue útil esta respuesta?

Sí No

Puntuación 1

2 comentarios:

You think this is the problem?

13 de dic. de 2009 - de superbat

I'm not sure I fully understand but if your power button connector socket has come off the logic board you could definitely try my suggestion.

13 de dic. de 2009 - de QEII Student IT

superbat @superbat Rep: 1 3 · Answer 2 · 2009-12-13T09:54:12-07:00

Rep: 1

3

Opciones

Well i am just making like contact with the base with something to see if its turning on is not solded.

Fue útil esta respuesta?

Sí No

Puntuación 0

1 comentario:

You mean the port isn't soldered onto the board?

13 de dic. de 2009 - de QEII Student IT

superbat @superbat Rep: 1 3 · Answer 3 · 2009-12-13T09:58:24-07:00

Rep: 1

3

Opciones

yes i mean that but i think that it should turn on making contact with the board with something.

Fue útil esta respuesta?

Sí No

Puntuación 0

superbat @superbat Rep: 1 3 · Answer 4 · 2009-12-13T11:46:45-07:00

Rep: 1

3

Opciones

There is no way to turn on teh computer like in other way or with a trick?

Fue útil esta respuesta?

Sí No

Puntuación 0

Ashok Singh @ashoksingh25127

Ashok Singh @ashoksingh25127 Rep: 1 · Answer 5 · 2021-04-02T20:56:12-07:00

Rep: 1

Publicado: 2 de abr. de 2021

Opciones

I don't know I comprehend the depiction of the issue, however one thing I would suggest is keeping the PC open, for example just let the topcase/lay on top the board while it is connected. That way, you can confirm your associations, take a stab at controlling it on, unplug/plug in another association, have a go at driving it on, and so forth Nothing is seriously baffling that putting an iBook right back together just to acknowledge something different isn't right and you need to return in once more. Source

Fue útil esta respuesta?

Sí No

Puntuación 0