Saltar al contenido principal

The Polaroid Automatic 100 Land Camera is the first of four generations of folding rangefinder Polaroid cameras. It features folding bellows and automatic exposure.

Preguntas 5 Ver todo

How do I develop the picture?

I have a polaroid land camera and I don't understand what I have to do to make the picture develop? Should I shake it or what?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

1 Respuesta

Solución Elegida

Step 1: Pull the white tab all the way out of the camera to expose the yellow tab labeled “pull” (Note: if you can see both a yellow and white tab, pull the yellow tab. Never pull the white tab when both are exposed, as this can ruin the entire film pack)

Step 2: Pull the yellow tab straight out of the camera without hesitation and with a little bit of speed. This will start the development process.

Step 3: Make sure to hold the tab only by the yellow tip and do not touch the white paper (don't bend it or shake it either!). Allow photo to develop for recommended time.

Step 4: After the full development time, quickly pull the print away from the white paper, starting near the yellow tab. Do not start from the other end, this will cause developer’s chemicals to leak on your fingers. Do not touch the face of the print.

Step 5: Color photos need to be mounted and black and white photos should be coated. This will preserve them longer.

Fue útil esta respuesta?

Calificación 2
Agregar un comentario

Añadir tu respuesta

Katie Miller estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 5

Todo El Tiempo: 248