Saltar al contenido principal

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2375 Ver todo

help on repairing/rebuilding my iPhone 4.

Hey ifixit geniuses i am trying to revive my old iphone 4. It has tons of memories on it and i want to be able to keep those while bringing this phone back to life. The phone only charges when off or out of batteries so it will not connect to my computer to save to transfer data. I have tried a hard reset and it wont update because it doesnt have enough space. I guess i could just replace the charger port but I dont want to put time and money into something that wont be worth it. I want to rebuild it basically but have that memory on the new phone. Basically i guess i am asking can the circuit board be removed from this old chassis into a new one so i can keep the memory on it. im looking to purchase this one to do this with. http://www.chinahcs.com/iphone-middle-fr...

Thank you al very much!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

5 Respuestas

Respuesta Más Útil

Hello yes a frame change will work but I have seen the problem with iPhone 4 tht only charges when off and it's a motherboard problem not a part problem but you will no when you put board into a working frame

Fue útil esta respuesta?

Puntuación 1

6 comentarios:

So Wade i dont get that answer really. Con how can i fix the motherboard on it then so i can just transfer the data from the broken phone before i do the repairs

- de

First thing to do really is change the charging port it's inexpensive at only a few dollars.

This way you will no if it works then save your data and buy the new midframe with confidence knowing it will work..

If it doesn't work then it's the motherboard I would contact Jessabethany@gmail.com if you have any questions if it turns out to be a motherboard problem

- de

I bought a charging port idk if its for a 4s or 4 or gsm or verizon. does any of that matter? thanks for th help

- de

When you bought the part what was the description of the part?

Post a pic I can tell you what model it is for

- de

Ok found the one i bought. it works with the phone. any good guides you know of that are detailed in switching the charger port out?

- de

Mostrar 1 comentario más

Agregar un comentario

iPhone 4 Dock Connector Replacement

Here is a guide now this includes taking the motherboard out this can be done with out removing the motherboard and just disconnecting the dock flex and taking the speaker out..

This should give you enough room to change the port without motherboard disassembled

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Again con wins.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Looks like a frame does when you do a screen replacement. Should work.

Fue útil esta respuesta?

Puntuación 0

2 comentarios:

?? dont get this too well. thanks though

- de

The frame you are looking to buy, looks just like a frame does when you disassemble it for repairs. I said I thought the frame should work.

- de

Agregar un comentario

Hoffman--Without fully installing it, you can just overlay your new charging port as is onto the connector at the logic board, then plug in battery, boot phone, and then see if it will connect to iTunes via the new partially installed port. Could save some trouble and still answer your question.

jessa

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

hoffman3339 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 122