Repara tus cosas Comunidad Tienda

Quinta generacion de iPhone. La reparación de este dispositivo es fácil y requiere destornilladores, herramientas de hacer palanca, y paciencia. GSM/CDMA /16, 32, o 64 GB / Negro o Blanco.

Preguntas 2201 Ver todo
Pregunta Cerrada

Opciones

Can I solder my 4s logic board?

When recently doing a screen replacement/home button/battery exchange, I noticed a small transistor floating around in my iPhone chassis during the tear down. I thought far enough ahead to save the piece but thought little of it. Upon turning the phone on...no service :( so I took the phone apart again and scoured for pictures of the iPhone's logic board so i could play a game of find the differences. Luckily I have found where the piece goes, I just have no clue how to reattach it. Called a local repair guy and he wanted $125 to START. So I asked him to kindly...I said no. the piece needs soldered on, but is the size of half a grain of rice and has what looks like 4 contact points...

ANY ADVICE WILL BE GREATLY APPRECIATED

Thanks guys,

Matt

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

legitimateaz, those components are extremely difficult to get soldered back on. Unless you have a lot of experience and the right tools, I would not suggest to do this repair yourself. It does require a microscope etc. for the soldering. Try to contact the user hectordtruong on here. I am certain he can provide with the assistance you need. Just in case it has crossed your mind, do not attempt to glue it back on :) Hope this helps, good luck.

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

Hahaha gluing was my first instinct...no lie. But thank you much sir, I'll contact that user and see what i can get figured out.

- de

Agregar un comentario

Opciones

$125 is outrageous. I would not charge more than $50!. It's the blue coil you're missing?

You can try to bypass it but again if you don't have exp soldering, leave it to the pros or you will damage it further.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

on ebay there is what is called soldering conductive glue . it has a pin point for it to come out of . there is no risk of burning your board all you need is a microscope/magnifying glass.

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Oh please dont. This stuff has ruined soooo many phones. I am scrubbing that stuff out of boards every week. It will undoubtedly just short stuff together and make the problem far worse. It is true that the repair above is in the $50-70 range. Just send it out and it will come back just like new.

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 3

Todo El Tiempo: 2,363