Foro de reparación de MacBook Pro 13" Unibody Early 2011
Preguntar
apple hardware test error code 4sns/1/C0000008 TPCD--124?
aceptado MacBook Pro 13" Unibody Early 2011 1 Respuesta
MacBook Pro 13: SSD not working even after cable replacement!
aceptado MacBook Pro 13" Unibody Early 2011 5 Respuestas
MacBook Pro running slow when magsafe disconnected
aceptado MacBook Pro 13" Unibody Early 2011 4 Respuestas
Reseated RAM, blank screen, beeping every 5 secs. tried everything ...
aceptado MacBook Pro 13" Unibody Early 2011 4 Respuestas
New Seagate SSHD not recognized internally, but OK with external USB
aceptado MacBook Pro 13" Unibody Early 2011 4 Respuestas
do all logicboards (i5, i7) fit into any 13" unibody non-retina
aceptado MacBook Pro 13" Unibody Early 2011 4 Respuestas
Liquid damage, temp sensor TPOP -- 124
aceptado MacBook Pro 13" Unibody Early 2011 3 Respuestas
Mac turns off with low battery
aceptado MacBook Pro 13" Unibody Early 2011 3 Respuestas
Removing optical drive to reduce weight
aceptado MacBook Pro 13" Unibody Early 2011 3 Respuestas
Turns on and works fine for 3 minutes, but shuts off unexpectedly
MacBook Pro 13" Unibody Early 2011 2 Respuestas
Should I back up my hard drive before replacing a part?
aceptado MacBook Pro 13" Unibody Early 2011 2 Respuestas
Why aren't my MacBook Pro's internal speakers working?
aceptado MacBook Pro 13" Unibody Early 2011 2 Respuestas
USB ports need replacing as not working. Have been told they cannot
MacBook Pro 13" Unibody Early 2011 1 Respuesta
Can battery damage logic board?
aceptado MacBook Pro 13" Unibody Early 2011 1 Respuesta
