Saltar al contenido principal

Sostituzione gruppo schermo iMac Intel 21.5" Retina 4K

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 27 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 3

Paso 3
iMac Intel 21.5" Retina 4K Display Assembly Replacement: paso 0, imagen 1 de 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: paso 0, imagen 2 de 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: paso 0, imagen 3 de 3
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

Solleva lo schermo dalla scocca e rimuovilo dall'iMac.

Può rendersi necessario sollevare lentamente il display da uno dei bordi laterali per staccare l'adesivo rimasto.

Stai molto attento nel maneggiare lo schermo: è grande, pesante e di vetro.

Dopo aver tagliato l'adesivo, non può essere più riutilizzato per rimettere al suo posto il display. Segui questa guida per sostituire le strisce adesive che fissano lo schermo alla scocca.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.