Repara tus cosas Comunidad Tienda

Sostituzione gruppo schermo iMac Intel 21.5" Retina 4K

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 27 guías que incluyen este paso.

Volver a la Guía
Inglés
Italiano
Paso 2
iMac Intel 21.5" Retina 4K Display Assembly Replacement: paso 0, imagen 1 de 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: paso 0, imagen 2 de 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: paso 0, imagen 3 de 3

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Fai attenzione a non toccare i conduttori del condensatore o le saldature esposte sul retro dell'alimentatore (in rosso).

Afferra la linguetta all'estremità di una delle strisce adesive del bordo inferiore dello schermo e tira l'adesivo verso il bordo superiore dell'iMac per rimuoverlo.

Ripeti questo passo con l'altra striscia adesiva e rimuoverla.

Se una delle strisce adesive si rompe prima di essere rimossa, usa una scheda di plastica per tagliare l'adesivo rimasto.

[* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).
[* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
[* black] Repeat this step with the other adhesive strip and remove it.
-[* icon_note] If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.
+[* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.