Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Inglés
Español
Paso 2
With the battery facing up (battery connector on the right), carefully align the exposed portion of the adhesive strips along the lower edge of the front of the battery, and press them gently into place. Take care to line up the strips correctly the first time. Once they adhere to the battery, they can't be removed and reused—you'll have to start over with fresh strips. Take care to line up the strips correctly the first time. Once they adhere to the battery, they can't be removed and reused—you'll have to start over with fresh strips.
  • With the battery facing up (battery connector on the right), carefully align the exposed portion of the adhesive strips along the lower edge of the front of the battery, and press them gently into place.

  • Take care to line up the strips correctly the first time. Once they adhere to the battery, they can't be removed and reused—you'll have to start over with fresh strips.

Con la batería hacia arriba (conector de la batería a la derecha), alinea cuidadosamente la parte expuesta de las tiras adhesivas a lo largo del borde inferior de la parte frontal de la batería, y presiona suavemente en su lugar.

Ten cuidado de alinear las tiras correctamente la primera vez. Una vez que se adhieren a la batería, no se pueden quitar y reutilizar, tendrás que empezar de nuevo con tiras nuevas.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.