Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 5
For small coaxial connectors, like these U.FL antenna cable connectors, slide a thin, ESD-safe pry tool or tweezers under the wire until it's snug against the connector, and pry straight up from the board. To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket. To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket.
Coaxial Connectors
  • For small coaxial connectors, like these U.FL antenna cable connectors, slide a thin, ESD-safe pry tool or tweezers under the wire until it's snug against the connector, and pry straight up from the board.

  • To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket.

Para conectores coaxiales pequeños, como estos conectores de cable de antena U.FL, desliza una herramienta de palanca o pinzas finas y seguras contra ESD debajo del cable hasta que quede ajustada contra el conector, y haz palanca directamente desde la placa.

Para reinstalar, sostén los conectores en su lugar y presiona suavemente hacia abajo. Los conectores se "encajan" en sus enchufes de manera similar a los broches metálicos de una chaqueta.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.