Saltar al contenido principal

Google Pixel 8 Pro スクリーンの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 14 guías que incluyen este paso.

Inglés
Japonés
Paso 20
Google Pixel 8 Pro Screen Replacement, Disconnect the screen: paso 0, imagen 1 de 3 Google Pixel 8 Pro Screen Replacement, Disconnect the screen: paso 0, imagen 2 de 3 Google Pixel 8 Pro Screen Replacement, Disconnect the screen: paso 0, imagen 3 de 3
Disconnect the screen
  • Insert the point of a spudger under the top right corner of the screen's press connector.

  • Gently pry up and disconnect the cable.

  • Remove the screen.

  • To reconnect a press connector, align it over its socket and gently press down on one side until it clicks into place, then press down on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

スパッジャーの先端を、スクリーンのプレスコネクタの左右上コーナーの下に差し込みます。

ケーブルをこじ開けて接続を外します。

これでスクリーンが外せるようになりました。

このようなプレスコネクタを再装着するには、慎重に位置を合わせて片側をカチッと音がするまで押し下げ、反対側も同様に行います。真ん中は押さないでください。コネクタの位置がずれると、ピンが曲がってしまい、永久的な損傷を与える可能性があります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.