Saltar al contenido principal
Alemán
Inglés

Traduciendo paso 7

Paso 7
Measure continuity on SD-card slot write protect switch If it is not working, short the two points with a bodge wire, so write lock is disabled
Check SD-Card slot
  • Measure continuity on SD-card slot write protect switch

  • If it is not working, short the two points with a bodge wire, so write lock is disabled

  • Another fault is a broken soldering joint holding the case of the SD-card reader in place.

Measure continuity with a multimeter on SD-card slot write protect switch

If it is not working, short the two points with a bodge wire, so write lock is disabled

Another possible fault is a broken soldering joint holding the case of the SD-card reader in place.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.