Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Examine the damaged area of your jacket. In our case we have a few missing stitches along a single line of stitching.
-
Select thread that matches the fabric color on the outside of the jacket and load it into the sewing machine.
-
Select thread that matches the fabric color on the lining of your jacket and load it into the bobbin of your sewing machine.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Set your sewing machine stitch length to about 3.
-
Clip the extra thread off of your jacket.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Align the jacket in the sewing machine at a distance of roughly five stitches before the missing stitching.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Sink the needle, being sure that it aligns with the stitching.
-
Sew forward a few stitches and then backstitch to hold your stitches in place.
-
Sew along the holes where the stitching used to be.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Continue sewing until you overlap five of the remaining stitches.
-
Backstitch to hold your stitches in place.
-
Clip any threads to free the garment from the sewing machine.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
2 comentarios
Do you think you could demonstrate adding an elastic cuff to the nano-puff? I have one but the sleeves are just a hair too short.
I got a new jacket recently and soon discovered loose stitching on the sleeve underarm.
On my precious jacket I didn’t want to use a sewing machine -sewing the two layers together- so I used a needle and the loose thread to secure the loose threads to the fabric.
This time I tried my grandmothers #12 crochet needle to crochet (knot) the threads to the secure stitches and pull the ends under.
