Introducción

Removing the back panel is simple, provided you have the correct screwdriver. Nintendo uses a special Tri-wing bit for the case, be sure you have one of these before disassembling!

Remove the cartridge from the console.
  • Remove the cartridge from the console.

  • Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case, turning the screw counter-clockwise.

  • Remove the battery door.

Agregar Comentario

Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic open tool or spudger isn't available, your fingernails may work.
  • Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic open tool or spudger isn't available, your fingernails may work.

Agregar Comentario

  • Remove the battery from the Nintendo DS.

Agregar Comentario

  • Remove the 7 Y0 screws located on the back.

  • It might be helpful to remove the strap from the hole to access the top left screw.

Agregar Comentario

  • With your hands, pry the back panel off the main case.

  • Separate the back from the front, and set it aside.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

dnguye26

Miembro Desde 28/10/09

310 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 18-3, Maness Fall 2009 Miembro de Cal Poly, Team 18-3, Maness Fall 2009

CPSU-MANESS-F09S18G3

4 Miembros

10 Guías creadas

Where do I get a nintendo DS gamepak?

Kayla Maison - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 14

Últimos 30 Días: 56

Todo El Tiempo: 12,195