Repara tus cosas Comunidad Tienda

Microsoft Surface Pro 7 Kickstand Replacement

Introducción

Follow this guide to replace the kickstand on your Microsoft Surface Pro 7.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Qué necesitas

  1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: paso 1, imagen 1 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: paso 1, imagen 2 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: paso 1, imagen 3 de 3

    • Lift the kickstand to expose the hinge screws.

    Editar

  2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: paso 2, imagen 1 de 2 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: paso 2, imagen 2 de 2

    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

    Editar

  4. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: paso 3, imagen 1 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: paso 3, imagen 2 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: paso 3, imagen 3 de 3

    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

    Editar

  5. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: paso 4, imagen 1 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: paso 4, imagen 2 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: paso 4, imagen 3 de 3

    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

    Editar
Conclusión

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Sam Omiotek

Miembro Desde 02/25/19

73,414 Reputación

288 Guías creadas

Insignias: 35

+ 32 más insignias

2 comentarios

One of the hinges broke on my Surface Pro 6.

1. I removed the broken hinge, closed the kickstand and duct taped the seam.

2. I opened the kickstand wide and duct taped the seam.

The single hinge and duct tape seem to be working!

"Spare the duct tape, spoil the job." - Red Green

P Best - Contestar

What are the parts used for this fix?

Andrea Shaw - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 9

Ultimos 7 días: 57

Ultimos 30 días: 218

Todo El Tiempo: 6,573