Introducción
This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.
Use this guide to replace the graphite sheet and thermal insulator in your Google Pixel Fold following a repair.
Qué necesitas
-
-
Place the new graphite sheet over the logic board to check the proper orientation.
Pregunta a FixBot
-
-
-
Peel off the new graphite sheet from its clear liner and apply the sticky side to the logic board.
-
Use the flat end of a spudger, or your fingers, to press down the adhesive and ensure a good seal.
-
-
-
-
Peel off both of the blue liners to expose the graphite sheet.
-
-
-
Peel off the new thermal insulator from its clear liner and apply the sticky side to the top left corner of the graphite sheet.
-
-
-
Use the flat end of a spudger, or your fingers, to press down the thermal insulator and ensure a good seal.
-
Grip the pull tab and peel off the blue liner to expose the thermal insulator.
-
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
