How to Apply New Bottom Speaker Adhesive in Your Google Pixel Fold

Introducción

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Use this guide to replace the bottom speaker adhesive in your Google Pixel Fold following a repair.

Follow this guide to remove the bottom speaker, if you haven't done so already.

Herramienta utilizada en este paso:

Tweezers

$4.99

Comprar

Use tweezers, or your fingers, to peel off the adhesive strip from the bottom speaker.

Peel off the new adhesive strip from its liner and apply the sticky side to the bottom speaker.
Use a spudger, or your fingers, to press down the adhesive and ensure a good seal.

Use tweezers, or your fingers, to pull off the tab and expose the top layer of adhesive.

Insert the bottom speaker at a shallow angle into its recess in the frame.
Push the speaker towards the bottom edge of the phone until it sits flat in the frame.
Push down on the speaker to ensure a good seal in the adhesive.