[summary]Una cámara réflex de película de 35 mm presentada por Pentax en 1997. Cuenta con enfoque automático y es compatible con una amplia gama de objetivos con montura K.[\/summary]
La cámara no se enciende
La cámara no responde cuando el interruptor de encendido está en la posición 'On'.
Comprobar las baterías
Instala baterías nuevas en la cámara para asegurarte de que el problema no sea una baja tensión de la batería.
Contactos de la batería
Comprueba los contactos del compartimento de la batería, tanto internos como externos. Si hay algún signo de corrosión, límpialos a fondo.
Espejo atascado
El espejo réflex en el cuerpo de la cámara está atascado en la posición superior, bloqueando el visor. Al pulsar el botón de disparo, el espejo no se mueve o lo hace muy poco.
Engranaje del motor del espejo
Lo más probable es que el engranaje del motor del espejo haya fallado. Se trata de un engranaje de plástico ajustado a presión sobre el eje de un pequeño motor cerca de la caja del espejo. Este controla gran parte de la funcionalidad principal de la cámara, incluyendo el movimiento del espejo, la carga del obturador y el cierre del diafragma. Cuando el engranaje falla, todas estas funciones se detienen. Al pulsar el botón de disparo, normalmente se oye un zumbido mientras el eje del motor gira libremente, pero no ocurre nada más. Para solucionar el problema, consulta la guía de reparación del Engranaje del motor del espejo en la página del dispositivo ZX-5n.
Palanca de accionamiento del espejo
La palanca de accionamiento del espejo se encuentra en la misma zona que el engranaje del motor del espejo y es la encargada de mover el espejo durante la exposición. Si se rompe, el espejo se quedará atascado en la posición superior, pero todo lo demás debería funcionar normalmente. Cuando se pulsa el botón de disparo, se puede ver y oír cómo se activa el obturador. La guía de reparación de la Palanca de accionamiento del espejo también se encuentra en la página del dispositivo ZX-5n.
Enfoque automático intermitente
El enfoque automático funciona de forma intermitente al pulsar el botón de disparo hasta la mitad.
Cambiar el objetivo
Si tienes acceso a otro objetivo, intenta cambiarlo. Si el problema desaparece, el fallo está en el objetivo y no en la cámara.
Contactos eléctricos
El problema puede deberse a que los contactos entre el objetivo y el cuerpo de la cámara estén sucios. Retira el objetivo de la cámara y limpia los contactos en la montura del objetivo y en el cuerpo de la cámara.
Botón de disparo
Los contactos dentro del botón de disparo pueden oxidarse con el tiempo, causando un contacto intermitente. Retira la cubierta superior para acceder al interruptor, que se puede desmontar y limpiar.
Disparo del obturador intermitente
Al pulsar el botón de disparo hasta el fondo, el obturador no se dispara de forma consistente.
Botón de disparo
Los contactos dentro del botón de disparo pueden oxidarse con el tiempo, causando un contacto intermitente. Retira la cubierta superior para acceder al interruptor, que se puede desmontar y limpiar.
El flash no se despliega
El flash no se despliega completamente al pulsar el botón.
Pivote del flash
El muelle que acciona el flash desplegable está montado sobre un pequeño pivote de plástico. El pivote es propenso a agrietarse, lo que libera la tensión del muelle y deja de proporcionar suficiente apoyo para el flash. Puedes encontrar una guía de reparación para el Pivote del flash en la página del dispositivo ZX-5n.
La cámara selecciona una exposición incorrecta
La cámara solo selecciona la velocidad de obturación más rápida y/o la apertura más pequeña en los modos de exposición automática.
Célula de medición defectuosa
Es posible que sea necesario sustituir la célula de medición que mide la intensidad y la distribución de la luz en la escena. Se puede acceder a ella retirando la placa superior y se encuentra entre el ocular y el prisma.
10 comentarios
I’ve successfully completed the mirror motor repair before but when i tried on another camera it resulted in it constantly firing the shutter without fully pressing the button. I was wondering if you knew what was going on and how you would go about fixing it.
Whenever i have the batteries in and close the battery door it automatically fires about 10 consecutive shots and whenever i change the dials or turn the camera on and off it happens. I’m lost.
Thanks in advance the guide was great!
Eddie Xia - Contestar Compartir
I've had one camera do this to me so far. My guess is that the camera is cycling and trying to find its "home" or "ready to fire" position. The feeler contacts on the green gear are part of this. But it can't find home and keeps cycling for a set amount of time before it stops. I took it apart, checked it, and put it back together three times without any improvement. I chalked it up to some other electrical failure in the system and declared it a "parts" camera.
Sam Gustafson - Contestar Compartir
Your guess was correct. I took apart the camera after I commented and found that the contacts on the green gear was bent out of place so I bent them back and reassembled the camera which solved the issue.
But when I tried the autofocus it wouldn't work. I confirmed with another camera that the lens wasn't the issue. Cleaning the contacts didn't work. Do you have any clue on what the problem might be? Otherwise the camera works fine. I yet again lost.
Eddie Xia - Contestar Compartir
Oh awesome! Glad you worked out that issue.
Regarding autofocus, the repair for the mirror generally stays away from the autofocus system so I doubt that you messed anything up with the sensors or the motor. It's always possible that a wire got resoldered in the wrong spot so I would double check that. I have had several cameras with shoddy shutter buttons that would fire the shutter and/or engage autofocus inconsistently. But the switch is cleanable. Desolder it from the flex (be careful not to melt all the plastic nearby), and pop the metal top off. Use some IPA to clean any oxidation from the copper contacts and it should work like new.
If you have a cable release for the camera, that can also help diagnose the issue. Connect the cable release and half press the button. The autofocus should engage. If it does, then the shutter button on the camera is likely the issue. If it doesn't, then the problem is elsewhere.
Sam Gustafson - Contestar Compartir
Before I try anything I should probably properly explain the situation. The camera shoots fine but whenever it takes picture it doesn't correct the focus and instead just takes blurry pictures. The autofocus never engages. Otherwise the camera works fine. I was wondering if that would be a completely different problem from the solution you gave.
I'm just speculating at this point in order to avoid taking it apart for the fifth time and causing more problems.
Eddie Xia - Contestar Compartir