Editando No se enciende el iPhone X

Esta traducción puede estar desactualizada

Mostrar Cambios

	Try these solutions if your iPhone X won’t turn on. Many of these fixes apply to other model iPhones as well—check the [[iPhone Won't Turn On\|iPhone won’t turn on wiki]] for more generalized instructions.

-	== Cause 1: iPhone needs a force restart ==
+	[comment]solutions[/comment]
+
+	== iPhone Needs a Force Restart ==

	Your iPhone 10 may simply be temporarily frozen and needs a manual reset or “force restart.” Quickly press and release the *volume up* button, then the *volume down* button. Finally, press and hold the *power button* until the Apple logo appears, and then release it. For complete instructions, see the guide [guide\|99182\|How to Force Restart iPhone X].

-	== ~~Cause 2:~~ Dead ~~battery~~ ==
+	== Dead Battery ==

	If your battery is completely drained of charge, your iPhone may not immediately turn on even when plugged into a power source. Connect your iPhone to a charger and let it charge for 30 minutes, and then try turning it on again.

-	== ~~Cause 3:~~ Dirty ~~charging port~~ or ~~cable~~ ==
+	== Dirty Charging Port or Cable ==

	If the iPhone still doesn’t turn on after 30 minutes connected to power, check the charging port and cable and make sure they’re clean. If the charging port is clogged with debris or the charging cable contacts are dirty, this can prevent the battery from charging. Clean the port carefully with a toothpick and a little isopropyl alcohol, let it dry, and try a different charging cable. Alternatively, try charging your iPhone wirelessly.

-	== ~~Cause 4:~~ Faulty ~~battery~~ or ~~charging port~~ ==
+	== Faulty Battery or Charging Port ==

	If the iPhone still doesn’t turn on, it may have a dead battery or a bad charging port. [guide\|103390\|Replace the battery\|new_window=true] with a partially charged one and see if the phone will turn on. If not, there may be a power button or logic board issue. If the phone does turn on, plug it in and see if the charging indication comes on. If the phone says it is charging, then the Lightning connector works, and you likely had a bad battery. But if it still doesn’t charge, you may need to replace the Lightning connector.

-	== ~~Cause 5:~~ Bad ~~power button~~ ==
+	== Bad Power Button ==

	If the power button doesn't seem to work, plug the iPhone into a power source and see if it turns on automatically. If the phone turns on and has power, then there might be a problem with either the power button or the power button cable. Test the power button and replace it if necessary.

-	== ~~Cause 6:~~ Bad ~~display~~ ==
+	== Bad Display ==

	It’s possible that it ''appears'' nothing is happening because the display is bad. An easy way to test this is to turn the phone on and listen for a sound. Also, you can move the mute toggle switch back and forth to see if it vibrates. If it vibrates or you hear a sound but nothing displays on the screen, then the screen is most likely the problem. Try replacing it and see if the display is still black.

	You can also learn [guide\|102423\|how to replace the iPhone X screen yourself\|new_window=true].

-	== ~~Cause 7:~~ Bad ~~logic board~~ ==
+	== Bad Logic Board ==

	If none of the above solutions does the trick, your logic board may be faulty and needs to be replaced. You can either replace the entire board, or attempt to diagnose and repair it using microsoldering techniques. That is a whole 'nother beast!

-	If you’re interested in learning board-level repair, you can start your investigation [link\|https://www.ifixit.com/News/know-about-microsoldering\|here]! You can also get [product\|IF317-062\|the materials to practice microsoldering here\|new_window=true].
+	If you’re interested in learning board-level repair, you can start your investigation [link\|https://www.ifixit.com/News/know-about-microsoldering\|here]! You can also get [product\|IF317-062\|the materials to practice microsoldering here\|new_window=true].
+
+	[comment]conclusion[/comment]

	== Questions other people have asked about this ==

Inglés

Título de página

Título de Pantalla

Resumen

What to do when your iPhone X doesn't power on? Try these fixes first.

Información Adicional

Try these solutions if your iPhone X won’t turn on. Many of these fixes apply to other model iPhones as well—check the [[iPhone Won't Turn On|iPhone won’t turn on wiki]] for more generalized instructions.

[comment]solutions[/comment]

== iPhone Needs a Force Restart ==

Your iPhone 10 may simply be temporarily frozen and needs a manual reset or “force restart.” Quickly press and release the ***volume up*** button, then the ***volume down*** button. Finally, press and hold the ***power button*** until the Apple logo appears, and then release it. For complete instructions, see the guide [guide|99182|How to Force Restart iPhone X].

== Dead Battery ==

If your battery is completely drained of charge, your iPhone may not immediately turn on even when plugged into a power source. Connect your iPhone to a charger and let it charge for 30 minutes, and then try turning it on again.

== Dirty Charging Port or Cable ==

If the iPhone still doesn’t turn on after 30 minutes connected to power, check the charging port and cable and make sure they’re clean. If the charging port is clogged with debris or the charging cable contacts are dirty, this can prevent the battery from charging. Clean the port carefully with a toothpick and a little isopropyl alcohol, let it dry, and try a different charging cable. Alternatively, try charging your iPhone wirelessly.

== Faulty Battery or Charging Port ==

If the iPhone still doesn’t turn on, it may have a dead battery or a bad charging port.  [guide|103390|Replace the battery|new_window=true] with a partially charged one and see if the phone will turn on. If not, there may be a power button or logic board issue. If the phone does turn on, plug it in and see if the charging indication comes on. If the phone says it is charging, then the Lightning connector works, and you likely had a bad battery. But if it still doesn’t charge, you may need to replace the Lightning connector.

== Bad Power Button ==

If the power button doesn't seem to work, plug the iPhone into a power source and see if it turns on automatically. If the phone turns on and has power, then there might be a problem with either the power button or the power button cable. Test the power button and replace it if necessary.

== Bad Display ==

It’s possible that it ''appears'' nothing is happening because the display is bad. An easy way to test this is to turn the phone on and listen for a sound. Also, you can move the mute toggle switch back and forth to see if it vibrates. If it vibrates or you hear a sound but nothing displays on the screen, then the screen is most likely the problem. Try replacing it and see if the display is still black.

You can purchase a new screen [product|IF377-051-4|here|new_window=true].

You can also learn [guide|102423|how to replace the iPhone X screen yourself|new_window=true].

== Bad Logic Board ==

If none of the above solutions does the trick, your logic board may be faulty and needs to be replaced. You can either replace the entire board, or attempt to diagnose and repair it using microsoldering techniques. That is a whole 'nother beast!

If you’re interested in learning board-level repair, you can start your investigation [link|https://www.ifixit.com/News/know-about-microsoldering|here]! You can also get [product|IF317-062|the materials to practice microsoldering here|new_window=true].

[comment]conclusion[/comment]

== Questions other people have asked about this ==

* [post|445447]
* [post|488533]
* [post|544337][br]

== Similar iPhone X problems ==

* [post|465920]
* [post|503276]
* [post|493312]

Español

[title|No se enciende el iPhone X]

[summary]¿Qué hacer cuando tu iPhone X no enciende? Pruebe estas reparaciones primero.[/summary]

[summary_image|1968669]

Prueba estas soluciones si tu iPhone X no se enciende. Muchas de estas reparaciones también se aplican a otros modelos de iPhone: consulta [[iPhone no enciende|iPhone no enciende wiki]] para obtener instrucciones más generales.

== Causa 1: el iPhone necesita un reinicio forzado ==

Es posible que tu iPhone 10 simplemente se congele temporalmente y necesite un reinicio manual o un "reinicio forzado". Presiona y suelta rápidamente el botón ***subir volumen***, luego el botón ***bajar volumen***. Finalmente, mantén presionado el ***botón de encendido*** hasta que aparezca el logotipo de Apple y luego suéltalo. Para obtener instrucciones completas, consulta la guía [guía|99182|Cómo forzar el reinicio del iPhone X].

== Causa 2: batería descargada ==

Si su batería está completamente descargada, es posible que tu iPhone no se encienda de inmediato, incluso cuando está enchufado a una fuente de alimentación. Conecta tu iPhone a un cargador y déjalo cargar durante 30 minutos, y luego intenta encenderlo nuevamente.

== Causa 3: puerto de carga o cable sucio ==

Si el iPhone aún no se enciende después de 30 minutos conectado a la corriente, verifica el puerto y el cable de carga y asegúrate de que estén limpios. Si el puerto de carga está obstruido con desechos o los contactos del cable de carga están sucios, esto puede impedir que la batería se cargue. Limpia el puerto con cuidado con un palillo y un poco de alcohol isopropílico, déjalo secar y prueba con otro cable de carga. Alternativamente, intenta cargar tu iPhone de forma inalámbrica.

== Causa 4: batería defectuosa o puerto de carga ==

Si el iPhone aún no se enciende, es posible que tenga la batería agotada o un puerto de carga defectuoso. [guide|103390|Reemplaza la batería|new_window=true] por una parcialmente cargada y mira si el teléfono se enciende. De lo contrario, puede haber un problema con el botón de encendido o la placa lógica. Si el teléfono se enciende, conéctalo y mira si se enciende la indicación de carga. Si el teléfono dice que se está cargando, entonces el conector Lightning funciona y es probable que tengas una batería defectuosa. Pero si aún no se carga, es posible que debas reemplazar el conector Lightning.

== Causa 5: Mal botón de encendido ==

Si el botón de encendido no parece funcionar, conecta el iPhone a una fuente de alimentación y mira si se enciende automáticamente. Si el teléfono se enciende y tiene energía, es posible que haya un problema con el botón de encendido o con el cable del botón de encendido. Prueba el botón de encendido y reemplázalo si es necesario.

== Causa 6: Mala pantalla ==

Es posible que "parece" que no pasa nada porque la pantalla está mal. Una manera fácil de probar esto es encender el teléfono y escuchar un sonido. Además, puedes mover el interruptor de palanca de silencio hacia adelante y hacia atrás para ver si vibra. Si vibra o escuchas un sonido pero no aparece nada en la pantalla, lo más probable es que la pantalla sea el problema. Intenta reemplazarlo y mira si la pantalla sigue en negro.

Puedes comprar una pantalla nueva [producto|IF377-051-4|aquí|nueva_ventana=true].

También puedes aprender [guía|102423|cómo reemplazar la pantalla del iPhone X tu mismo|nueva_ventana=true].

== Causa 7: Tarjeta lógica defectuosa ==

Si ninguna de las soluciones anteriores funciona, su placa lógica puede estar defectuosa y debe ser reemplazada. Puedes reemplazar toda la placa o intentar diagnosticarla y repararla mediante técnicas de microsoldadura. ¡Esa es una bestiada!

Si estás interesado en aprender a reparar a nivel de placa, puedes comenzar tu investigación [enlace|https://www.ifixit.com/News/know-about-microsoldering|aquí]! También puedes obtener [producto|IF317-062|los materiales para practicar la microsoldadura aquí|nueva_ventana=true].

== Preguntas que otras personas han hecho sobre esto ==

* [publicación|445447]
* [publicación|488533]
* [publicación|544337][br]

== Problemas similares del iPhone X ==

* [publicación|465920]
* [publicación|503276]
* [publicación|493312]