Noah

Hello! I have a Samsung galaxy a-10e here that got drowned in a pool. It dried out, and I took out the boards, scrubbed...

Hello! I was wondering if you could test a 7 screen on a 7 plus, because I need to test a 7 screen but I don’t have a 7 to...

Hello. So my friend dropped his Samsung galaxy a10e in water and when making calls his microphone doesn’t work and when...

Hello I have an iPhone 7 Plus that recently got a little wet and then it went to boot loop and when I try to restore it...

Hello. I have an iPhone 5 and when I try to restore it, it shows error 2009. Is there a way to get past that

Hello. I am fixing a iPhone 6 and I am wondering if you can test out an iPhone 6 with an iPhone 7 dock connector.

Hello I have a iPhone 7 that was in a lake for a month and a half and I was wondering if 91% isopropyl alcohol would work...

Hello I have a iPhone 7 that has been in water for 1.5 months and I was wondering if you think the battery might still be...

Hello I was wondering if it would be a good idea to build a iPhone 8. I found a housing with all the small parts with the...

(1) So I dropped my iPhone 7 in a lake for a month in a half and I found it in the lake, so I opened it up and put it in...

1.The charging port may not be compatible with the iPhone that you have. I’d suggest you get the charging port for the correct model and try that out. 2. did the charging port work for the other phone? If not than that would be one problem.

So it’s the same screen? If it’s an aftermarket screen, it may be an error. If not try checking if the pins on either of the screen or the phone are damaged.

About the home button. Sadly the home button won’t work because it is a non physical button, and when you replace it you won’t get Touch ID or functionality back. About the WiFi. Maybe there is a dead spot in your screen that touch won’t work or I am wrong. Maybe a bad WiFi antenna. Hope this helps. Cheers

Hello. Is it in a boot loop?

Hello. Unfortunately you are going to have to replace the lcd because there is no way to get the ink out. Hope this helped. Cheers

You damaged the lcd cables.

You might of damaged the connector to the logic board during the fall

There would be a model number like a1500 on the back look it up and you will see

Sometimes you just have to press and hold the power button and volume button and the loop disease is a board related fix so you would have to get it fixed by professionals

I think the power button needs to be replaced if it may be putting to much pressure on the button

Maybe one of the pins on the connector on the board are broken? That would be my guess